6.8 External Memory Module. HP Compaq nc6230 Notebook PC, Compaq nc6220 Notebook PC, PU984AW

Removal and Replacement Procedures

6.8 External Memory Module

1024 MB

512 MB

256 MB

Memory Module Spare Part Number Information

373121-001

373120-001

373119-001

1. Prepare the computer for disassembly (refer to Section 6.3

).

2. Position the computer with the front panel toward you.

3. Loosen the PM1.5×4.0 screw 1 that secures the memory module compartment cover to the computer.

4. Lift the right side of the cover 2 up and swing it to the left.

5. Remove the memory module compartment cover.

✎

The memory module compartment cover is included in the

Miscellaneous Plastics Kit, spare part number 379812-001.

6–14

Removing the Memory Module Compartment Cover

Maintenance and Service Guide

Removal and Replacement Procedures

6. Spread the retaining tabs 1 on each side of the memory module socket to release the memory module. (The side of the memory module opposite the socket rises away from the computer.)

7. Slide the memory module 2 away from the socket at an angle.

8. Remove the memory module.

✎

Memory modules are designed with a notch 3 to prevent incorrect installation into the memory module socket.

Removing the Memory Module

Reverse the above procedure to install a memory module.

Maintenance and Service Guide 6–15