Design and Function. Caso Design CASO VC200 mit Box

manufacturer cannot be made responsible for damages due to a missing or damaged protective conductor.

15 Design and Function

This chapter provides you with important safety notices on the design and function of the device.

15.1 Complete overview

1 Connector for vacuum hose 2 Panel

3 Cover-lock - To lock the cover, press on the right and left side

4 Cover-unlock - Press buttons on right and left side

5 Cutter unlock - Press buttons on right and left side

If you open the cover, you see:

•

the Sealing bar, it contains a heating wire covered with Teflon which allows the bag to seal but not to stick to the wire.

•

Removable vacuum chamber. The open end of the bag must be placed inside the chamber. This feature makes sure that air cannot escape from the bag and that excess liquid is removed. Easy to remove and clean.

Warning

The sealing bar gets very hot.

Please observe the following safety notice in order not to burn yourself or others.

37