Opening your computer. Acer 7600

WU8711tfsjft`FO/cppl!!Qbhf!69!!Uivstebz-!Bqsjm!4-!3114!!5;55!QN

58

Opening your computer

4 Upgrading your computer

Caution! Before you proceed, make sure that you have turned off your computer and all peripherals connected to it. Read the

“Preinstallation instructions” on page 56.

You need to open your computer before you can install additional components. See the following section for instructions.

To remove the side panel

1 Turn off your computer and unplug all cables.

2 Place your computer on a flat, steady surface.

3 Remove the four screws from the rear panel using a screwdriver.

Set the screws aside.

WU8711tfsjft`FO/cppl!!Qbhf!6:!!Uivstebz-!Bqsjm!4-!3114!!5;55!QN

59

4 Hold one side panel with both hands. Slide it back about an inch and then gently pull it outward to detach it. Do the same to the other side.

To replace the side panel

1 Align the side panel's hinges to the housing frame and then push it in to slide it back into place. Do the same to the other side.

WU8711tfsjft`FO/cppl!!Qbhf!71!!Uivstebz-!Bqsjm!4-!3114!!5;55!QN

60 4 Upgrading your computer

2 Secure the side panels with the four screws you removed earlier.