Restarting the Antenna. TracVision TracVision M7, TracVision M5, M5, M7 & M7SK

Add to My manuals
94 Pages

advertisement

Restarting the Antenna. TracVision TracVision M7, TracVision M5, M5, M7 & M7SK | Manualzz

50

TracVision M5/M7 User’s Guide

Chapter 3 - Settings

Restarting the Antenna

Use the flowchart in

Figure 3-26

if you wish to restart the antenna.

Figure 3-26 Restarting the Antenna

<Default Display>

Menu

Select Next until “Restart

Antenna?” is displayed.

Restart Antenna?

Yes Next Return

Antenna Restarted

TracVision M5/M7 User’s Guide

Chapter 4 - Troubleshooting

4. Troubleshooting

This chapter identifies potential basic problems along with their possible causes and solutions. It also explains how to get technical support.

Contents

Five Simple Checks ......................................................... 53

Troubleshooting Matrix.................................................... 54

Causes and Remedies for Operational Issues ................. 55

Technical Support............................................................ 59

Field Replaceable Units ................................................... 60

51

advertisement

Key Features

  • Tracks multiple satellites simultaneously
  • Easy to install and operate
  • Compatible with both linear and circular satellites
  • Provides access to satellite TV programming while on the move
  • Designed for use with marine and RV applications
  • Compact and lightweight
  • Weather-resistant

Related manuals

Frequently Answers and Questions

How do I change the sleep mode setting?
To change the sleep mode setting, press the Menu button on the control panel, then use the arrow keys to navigate to the "Settings" menu. Select the "Sleep Mode" option, then use the arrow keys to select the desired sleep mode setting.
How do I change the instant on setting?
To change the instant on setting, press the Menu button on the control panel, then use the arrow keys to navigate to the "Settings" menu. Select the "Instant On" option, then use the arrow keys to select the desired instant on setting.
How do I set the MCP to track different satellites?
To set the MCP to track different satellites, press the Menu button on the control panel, then use the arrow keys to navigate to the "Settings" menu. Select the "Satellite Settings" option, then use the arrow keys to select the desired satellite. Press the Enter button to save your changes.
Download PDF

advertisement

Table of contents