advertisement
9 SETTING
Setting
MELSOFT
PURPOSE
To register the users who use the monitor tools, to set the passwords and engineer/operator1 to 4 authority for each user.
The operation authority range is set on User Authority Setting ( Section 9.2).
Monitor tools execute the mode administration according to the user's authority.
For details of the mode administration, refer to Chapter 4.
BASIC OPERATION
1. Input the user's (operator) name in the [User Name] cell.
2. Input the password that is only known by the user to the [Password] cell.
3. Select the user's authority in the list box of the [Authority] cell.
DISPLAY/SETTING SCREEN
Setting item
DISPLAY/SETTING DATA
Description Input method Input restriction
User Name Set the user name
Password
Set user's password
On the screen, characters of the password are displayed as "*".
Authority
Text box
Password dialog box
8 characters
8 characters
User's authority is selected to be engineer/operator1 to 4. List box
Engineer/Operator4/
Operator3/Operator2/
Operator1
Maximum 50 users can be registered.
The current user authority cannot be changed, and the current user cannot be deleted, either.
In the server/client monitoring system, users being used currently in clients cannot be changed. However, when clients connect to a secondary server in a redundant server system, users being used in the clients can be changed from a primary server. In this case, the setting data of the primary server are copied to the clients via the secondary server.
The same user name cannot be duplicated. Click the "apply" button to check whether user names are duplicated.
POINT
If the user name is not registered, the password and authority cannot be set.
First, make user setting.
When starting the monitor tool in the mode that matches the authority of the specified user ( Appendix 3.3), do not use a "/" (slash) or "-" (hyphen) in the first character of the user name and password.
9-12 9-12
advertisement
Related manuals
advertisement