advertisement
9 SETTING
MELSOFT
9.14 Faceplate Display Scale Setting
PURPOSE
To set the display scale, division number, display direction and both direction base point of the PV graph that are displayed on the faceplate.
To set when the initial set content changed.
BASIC OPERATION
1. Set optional tag name in [Tag Name].
2. When setting the tag name, the tag information of the item that is registered by the monitor target project setting will be compared with the input set data.
And then the mark that indicates tag existent/inexistent will be displayed automatically.
3. Input the display scale top/bottom limit, division number, display direction and base point when both direction is set of the set tag.
4. Click the "Apply" Button and check whether the bottom limit of the display scale is less than the top limit. The error message will be displayed when error occurs.
When the tag name is deleted, the display scale top/bottom limit, division number, display direction and base point when both direction is set are also deleted simultaneously.
DISPLAY/SETTING SCREEN
The icon indicates that the tag is unusable.
Maximum 3840 pieces of tag can be registered
Display on faceplate
Setting !
9-46
When display direction is set to "Positive direction"
Display scale
When display direction is set to "Negative direction"
Base point when both direction is set
When display direction is set to "Both direction"
9-46
9 SETTING
MELSOFT
DISPLAY/SETTING DATA
Setting item Description
Tag Name
Display Scale Bottom
Limit
Display Scale Top Limit
Division Number
Set the tag name of the display scale.
Set the display scale bottom limit of the PV graph which is displayed on the faceplate.
Set the display scale top limit of the PV graph which is displayed on the faceplate.
Set the division number of the PV graph which is displayed on the faceplate.
Display Direction
Base Point when Both
Direction is set
Input method
Text box
Text box
Text box
Input restriction
180 characters
REAL (Single precision floating decimal)
REAL (Single precision floating decimal)
Set the display direction of the PV graph bar to be displayed on the faceplate.
Text box 1 to 10
List box
When setting "Both direction" as the display direction, set the base point of the PV graph bar to be displayed on the faceplate.
This setting is available only when "Both direction" is set as the display direction.
Text box
Positive direction/
Negative direction/
Both direction
REAL (Single precision floating decimal)
Initial setting
----
0
100
10
Positive direction
0
POINT
The display scale top/bottom limit, division number, display direction and "base point when both direction is set" cannot be set without registering the tag name.
When "Both direction" is set as the display direction, set the both direction base point within the range indicated below.
Display scale bottom limit ≤ base point when both direction is set ≤ display scale top limit
If icon is displayed, confirm the error message to be displayed before taking the action.
When the relevant cell (s) is (are) selected, an error message is displayed in the status bar.
9-47 9-47
advertisement
Related manuals
advertisement