Notice
OMRON products are manufactured for use according to proper procedures by a qualified operator and only for the purposes described in this manual.
The following conventions are used to indicate and classify precautions in this manual. Always heed the information provided with them. Failure to heed precautions can result in injury to people or damage to property.
DANGER
Indicates an imminently hazardous situation which,
if not avoided, will result in death or serious injury. Additionally, there may be severe property damage.
WARNING
Indicates a potentially hazardous situation which, if not avoided, will result in death or serious injury. Additionally, there may be severe property damage.
Caution
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury, or property damage.
OMRON Product References
All OMRON products are capitalized in this manual. The word “Unit” is also capitalized when it refers to an OMRON product, regardless of whether or not it appears in the proper name of the product.
The abbreviation “Ch,” which appears in some displays and on some OMRON products, often means
“word” and is abbreviated “Wd” in documentation in this sense. The abbreviation “PLC” means
Programmable Controller.
The abbreviation “host” means a controller, such as an IBM PC/AT or compatible computer, that controls a PT (Programmable Terminal).
Visual Aids
The following headings appear in the left column of the manual to help you locate different types of information.
Note
Indicates information of particular interest for efficient and convenient operation of the product.
Reference
Indicates supplementary information on related topics that may be of interest to the users.
1,2,3...
1. Indicates lists of one sort or another, such as procedures, checklists, etc.
CS1G-CPU□□-V1 Boxes in model numbers indicate variable characters. For example:
“CS1G-CPU□□-EV1” indicates the following models: CS1G-CPU42-EV1,
CS1G-CPU43-EV1, CS1G-CPU44-EV1 and CS1G-CPU45-EV1.
©
OMRON,2011
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission of OMRON.
No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is constantly striving to improve its high-quality products, the information contained in this manual is subject to change without notice. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in this publication.
1
Contents
Notice................................................................................................................................................................. 1
About this Manual .............................................................................................................................................. 5
Related Manuals................................................................................................................................................ 6
Terminology ....................................................................................................................................................... 7
Introduction ........................................................................................................................................................ 8
Safety Precautions............................................................................................................................................. 9
Precautions for Safe Use..................................................................................................................................11
Precautions for Correct Use ............................................................................................................................ 13
Conformance to EC Directives ........................................................................................................................ 14
Read and Understand this Manual .................................................................................................................. 15
Section 1 Part Names and Functions ........................................................................................................... 18
1-1 Part Names................................................................................................................................................ 19
1-1 Part Names................................................................................................................................................ 19
1-2 Part Specifications..................................................................................................................................... 21
Section 2 Installing the NB Unit and Connecting Peripheral Devices........................................................... 23
2-1 Installing the NB Unit ................................................................................................................................. 24
2-1-1 Installation environment .............................................................................................................. 24
2-1-2 Installation onto the Operation Panel.......................................................................................... 25
2-1-3 Connecting the Power Supply..................................................................................................... 26
2-1-4 Grounding Wiring ........................................................................................................................ 27
2-2 Start of NB Series ...................................................................................................................................... 28
2-3 Connection to NB-Designer....................................................................................................................... 29
2-3-1 Connecting by RS-232C ............................................................................................................. 29
2-3-2 Connecting by USB..................................................................................................................... 29
2-4 Communication Connections .................................................................................................................... 31
2-4-1 Host Link Connection Method..................................................................................................... 31
2-4-2 Connecting more than one PLC.................................................................................................. 32
2
2-4-3 Settings for each Unit.................................................................................................................. 33
Section 3 System Setting Mode.................................................................................................................... 46
3-1 The display method of System Setting Mode............................................................................................ 47
3-2 Functions of System Setting Mode............................................................................................................ 47
Section 4 Calibrate Mode.............................................................................................................................. 49
4-1 The display method of Calibrate Mode...................................................................................................... 50
4-2 Functions of Calibrate Mode ..................................................................................................................... 50
4-3 On-line Touch-control Calibration Function ............................................................................................... 50
Section 5 Maintenance and Troubleshooting................................................................................................ 51
5-1 Maintenance .............................................................................................................................................. 52
5-2 Troubleshooting ......................................................................................................................................... 53
5-2-1 Software Trouble......................................................................................................................... 53
5-2-2 Communication-related Troubles................................................................................................ 72
5-2-3 Hardware Troubles...................................................................................................................... 75
5-2-4 Other Troubles ............................................................................................................................ 77
5-3 Request to change the NB Unit................................................................................................................. 78
Appendices ...................................................................................................................................................... 79
Appendix-1 Specifications ............................................................................................................................... 80
Appendix-1-1 General Specifications ................................................................................................... 80
Appendix-1-2 Performance Specifications ........................................................................................... 80
Appendix-1-3 Communication Specifications....................................................................................... 81
Appendix-2 External Dimensions .................................................................................................................... 82
Appendix-3 RS-422A/485 Connections........................................................................................................... 84
Appendix-3-1 Grounding and Shielding of the Cables ......................................................................... 84
Appendix-4 Fabrication of the Connection Cable............................................................................................ 86
Appendix-4-1 Cable Processing........................................................................................................... 86
Appendix-4-2 Soldering ........................................................................................................................ 87
Appendix-4-3 Shield Assembly............................................................................................................. 87
Appendix-4-4 Method for fabricating the cable for connection to OMRON PLC.................................. 88
3
Appendix-4-5 Method for fabricating the cable for connection to PC................................................... 89
Appendix-5 List of Models ............................................................................................................................... 90
Appendix-6 List of Options .............................................................................................................................. 94
4