Main Parts of the Machine. ICECAT GAS/PRO 220

1.4. Main Parts of the Machine

The ice resurfacer consists of three main parts. The front frame contains the snow tank, batteries, and the hydraulic unit. The back frame contains the auger, the flooding water tank, and the operator’s compartment, and is jointed to the front frame. The joint enables driving on uneven surfaces – e.g., when emptying the snow tank outside. The back frame is attached with a sled, which is primarily used for the ice maintenance. The sled contains the shaving blade, which must be handled with extreme care.

Figure 1. ICECAT GAS/PRO220 Ice Resurfacer

6