PR-C101 Operation Manual

PR-C101_C101M_E.book Page 29 Monday, August 27, 2007 11:16 AM

Getting the Most Out of Your Printer

Checking the Program Information and Serial Number

You can check the version of the program and the printer's serial number.

Note

z

You can also display the status on the printer driver. (

→See "Opening the Printer

Driver Settings Screen" on page 47.) z

You can confirm the following information.

• Version of the base program (display is [Base Ver..])

• Version of the main program (display is [Main Ver..])

The version of the program that starts when the power is turned on.

You can download a file to update the program.

→See "Updating the Printer's Software" on page 43 for updating instructions.

• Printer's serial number (display is [Serial])

• Thermal head's number (display is [Head])

• Version of the magnetic encoder (screen display [Encoder]) (PR-C101M only)

Magnetic encoder standard information (ISO/JIS2) and version information.

1

Switch from Normal Mode to User

Mode.

→See "Switching to User Mode" on page 16 for details on how to switch to User Mode.

Ready to Print

MENU

(3 Sec.)

CLEAR

User Mode >>

EXE

[User Mode]

2

Press the Menu Key until [Printer

Info. >>] appears, and then press the

EXE Key.

[User Mode]

MENU

MENU

Printer Info. >>

EXE

[Printer Info.]

3

Press the Menu Key to display the information to check.

• Pressing the Menu Key switches between [Base Ver.],

[Main Ver.], [Serial], [Head], and [Encoder].

[Printer Info.]

MENU

Base Ver. *.**

MENU

29