- No category
![](http://s1.manualzz.com/store/data/007149903_1-d4122bede9218b8a4be56099603c5067-128x128.png)
advertisement
![PR-C101 Operation Manual | Manualzz PR-C101 Operation Manual | Manualzz](http://s1.manualzz.com/store/data/007149903_1-d4122bede9218b8a4be56099603c5067-360x466.png)
PR-C101_C101M_E.book Page 31 Monday, August 27, 2007 11:16 AM
1
Switch from Normal Mode to User
Mode.
→See "Switching to User Mode" on page 16 for details on how to switch to User Mode.
2
Press the Menu Key until [Setup
Reset[C+E]] appears, and then press the EXE Key and the CLEAR Key at the same time.
Getting the Most Out of Your Printer
Ready to Print
MENU
(3 Sec.)
CLEAR
User Mode >>
EXE
[User Mode]
[User Mode]
MENU
MENU
Setup Reset[C+E]
Preventing Theft and Unauthorized Usage
Preventing Theft of the Printer (Security Cable Slot)
You can prevent theft of the printer by locking it with a wire cable.
Use a wire cable that fits the Security Cable Slot
(0.12" x 0.28" (3.00 mm x 7.00 mm)) to lock up the printer.
Note
z
Use a commercial security cable.
How to Store Cards (Removing the Card Case)
You can prevent unauthorized use of the cards by removing the Card Case and locking it in a safe or other secure location.
1
Pull the Card Case as indicated by arrow in the illustration.
• Grip the Card Case by the embossing on its sides and pull it forward and down.
• When you hear a click remove the Card Case.
31
advertisement
Related manuals
advertisement
Table of contents
- 3 Operating the Printer Safely
- 5 Part Names and Descriptions
- 5 Front of the Printer
- 6 Rear of the Printer
- 7 Front Cover
- 8 Operation Panel
- 10 Basic Card Printing Methods
- 10 Turning On and Off the Printer
- 11 Loading Cards
- 11 Loading Cards into the Card Case
- 12 Manually Loading Cards One by One
- 13 Printing
- 14 Removing Cards
- 15 Changing the Ink Ribbon Cartridge
- 15 When a Change is Necessary
- 15 Changing the Cartridge
- 17 Normal Mode and User Mode
- 17 Normal Mode
- 17 User Mode
- 18 Switching to User Mode
- 19 Basic User Mode Operations
- 19 Moving to the Next Menu (Switching to Menus on the Same Level)
- 19 Moving to a Sub-menu (Switching to Menus on a Lower Level)
- 20 Returning to the Main Menu (Switching to Menus on a Higher Level)
- 20 Switching to Normal Mode (Exiting User Mode)
- 21 Getting the Most Out of Your Printer
- 21 Reprinting a Card that Has Just Been Printed
- 22 Counting the Number of Cards that Are Printed
- 22 Displaying the Total Number of Sides that Are Printed
- 23 Switching the Card Ejection Slot
- 24 Checking the Ink Ribbon Remaining in the Ink Ribbon Cartridge
- 25 Checking the Ink Ribbon Cartridge that is Currently Installed
- 26 Adjusting the Print Quality
- 26 Adjusting the Color
- 28 Adjusting the Edges of Images
- 29 Turning the Error Alarm On or Off
- 30 Setting the Printer to Reprint a Card if an Error Occurs
- 31 Checking the Program Information and Serial Number
- 32 Changing the Magnetic Encoder's Settings (PR-C101M Only)
- 32 Returning Settings to the Default
- 33 Preventing Theft and Unauthorized Usage
- 33 Preventing Theft of the Printer (Security Cable Slot)
- 33 How to Store Cards (Removing the Card Case)
- 34 Cleaning
- 34 Before Cleaning
- 34 Cleaning with a Cleaning Card
- 36 Cleaning the Cleaning Roller
- 37 Cleaning the Feeding Roller
- 38 Troubleshooting
- 38 When an Error Message Appears
- 38 Clearing an Error
- 38 How to Clear an Error
- 41 When a Card is Jammed
- 42 When Cards are Not Printed Correctly
- 43 Other Troubles
- 43 When These Solutions Don't Work
- 44 Appendix
- 44 Consumables
- 44 Ink Ribbon Cartridges
- 45 Cards
- 45 Cleaning Cards
- 45 Updating the Printer's Software
- 46 Menu Route Map (User Mode)
- 48 Main Specifications