advertisement
![User Labels. Datamax h-class h-8308p | Manualzz User Labels. Datamax h-class h-8308p | Manualzz](http://s1.manualzz.com/store/data/007175048_1-6158dafad9951fde30cac09944e8b659-360x466.png)
2. Upon exiting the Print Adjust panel, either select the green Accept button or the red Reject button.
b. Contrast
The contrast adjustment is set within the range of -10 to +10. To increase contrast, adjust the settings in a positive (+) direction.
1. Enter the appropriate value in the field.
2. Upon exiting the Print Adjust panel, either select the green Accept button or the red Reject
Button.
c. Vertical Adjust
The vertical adjustment is set within the range of -100 to +100 dots. To move the image down, adjust the settings in a positive (+) direction.
1. Enter the appropriate value in the field.
2. Upon exiting the Print Adjust panel, either select the green Accept button or the red Reject button.
d. Horizontal Adjust
The horizontal adjustment is set within the range of -100 to +100 dots. To move the image to the right, adjust the settings in a positive (+) direction.
1. Enter the appropriate value in the field.
2. Upon exiting the Print Adjust panel, either select the green Accept button or the red Reject button.
The user button allows for the usage of custom labels and custom printer configurations that are saved internally or saved to a memory stick inserted in the USB host.
User Labels
Custom user labels that have been saved internally or in a mass storage device may be printed.
1. Select User Labels.
2. Select the file to be printed (internally or USB hosted).
3. Select the green Accept button.
4. Select the Print button to print the label.
Note:
Further details are available in the Advanced section of the menu. Please refer to the Advanced section of the manual for more information.
37
advertisement
Related manuals
advertisement
Table of contents
- 11 About the Printer
- 11 Standard Features
- 13 Optional Features
- 15 Unpacking
- 16 Additional Requirements
- 16 Installation
- 16 Connecting the Power Cord
- 17 Connecting an Interface Cable
- 19 3.1 Media Loading
- 21 Internal Media Sources
- 23 External Media Sources
- 25 Media Sensor Adjustment
- 26 Ribbon Loading
- 29 Configuring Media and Ribbon Settings
- 29 Using Media and Ribbon IDs
- 29 Selecting Media and Ribbon Types
- 31 Setting the Media and Ribbon Parameters Manually (Advanced)
- 31 Load a Saved Media File
- 32 Print Driver Installation
- 35 Menu Overview
- 35 Layout of the Display
- 36 Three Button Panel
- 36 Home Screen
- 38 Menu Functions
- 38 System Information
- 38 Settings Report
- 41 Network Report
- 41 Extended Status
- 41 Serial Report
- 42 GPIO Report
- 42 Fonts Report
- 42 Feed Button
- 43 Menu Button
- 43 Basic Settings
- 47 User Labels
- 48 Advanced Settings
- 56 Media Settings
- 57 Communications
- 61 Tools
- 81 Printhead Assembly Adjustments
- 81 Leveling Cam Adjustment
- 83 Printhead Pressure Adjustment
- 84 Maintenance
- 85 Cleaning the Printhead
- 87 Cleaning the Fan Filter
- 87 Cleaning the Interior Compartment
- 88 Cleaning the Media Sensing Components
- 88 Cleaning the Platen and Assist Rollers
- 89 Cleaning the Ribbon Path Components
- 91 Cleaning the Exterior Surfaces
- 92 Replacing the Printhead
- 95 Problem Resolution
- 97 Troubleshooting Print Quality
- 98 Error and Warning Messages
- 101 General
- 102 Specifications
- 104 Approved Media and Ribbon