advertisement
![Cleaning the Fan Filter. Datamax h-class h-8308p | Manualzz Cleaning the Fan Filter. Datamax h-class h-8308p | Manualzz](http://s1.manualzz.com/store/data/007175048_1-6158dafad9951fde30cac09944e8b659-360x466.png)
5.2.2 Cleaning the Fan Filter
On equipped models, a Fan Filter keeps dust and debris from entering the printer. To assure continued airflow through the printer, clean the Fan Filter as follows:
A. Turn OFF the Power Switch and unplug the power cord from the AC Receptacle.
B. Using a vacuum, clean the Fan Filter.
5.2.3 Cleaning the Interior Compartment
Inside the printer, paper dust from the media can accumulate to produce small voids in the print. To assure continued void free printing, clean the Interior Compartment as follows:
A. Turn OFF the Power Switch and unplug the power cord from the AC Receptacle.
B. Raise the Cover then remove media and ribbon.
C. Remove all media and ribbon.
D. Using compressed air (or a soft brush), clean all debris from Interior Compartment.
77
advertisement
Related manuals
advertisement
Table of contents
- 11 About the Printer
- 11 Standard Features
- 13 Optional Features
- 15 Unpacking
- 16 Additional Requirements
- 16 Installation
- 16 Connecting the Power Cord
- 17 Connecting an Interface Cable
- 19 3.1 Media Loading
- 21 Internal Media Sources
- 23 External Media Sources
- 25 Media Sensor Adjustment
- 26 Ribbon Loading
- 29 Configuring Media and Ribbon Settings
- 29 Using Media and Ribbon IDs
- 29 Selecting Media and Ribbon Types
- 31 Setting the Media and Ribbon Parameters Manually (Advanced)
- 31 Load a Saved Media File
- 32 Print Driver Installation
- 35 Menu Overview
- 35 Layout of the Display
- 36 Three Button Panel
- 36 Home Screen
- 38 Menu Functions
- 38 System Information
- 38 Settings Report
- 41 Network Report
- 41 Extended Status
- 41 Serial Report
- 42 GPIO Report
- 42 Fonts Report
- 42 Feed Button
- 43 Menu Button
- 43 Basic Settings
- 47 User Labels
- 48 Advanced Settings
- 56 Media Settings
- 57 Communications
- 61 Tools
- 81 Printhead Assembly Adjustments
- 81 Leveling Cam Adjustment
- 83 Printhead Pressure Adjustment
- 84 Maintenance
- 85 Cleaning the Printhead
- 87 Cleaning the Fan Filter
- 87 Cleaning the Interior Compartment
- 88 Cleaning the Media Sensing Components
- 88 Cleaning the Platen and Assist Rollers
- 89 Cleaning the Ribbon Path Components
- 91 Cleaning the Exterior Surfaces
- 92 Replacing the Printhead
- 95 Problem Resolution
- 97 Troubleshooting Print Quality
- 98 Error and Warning Messages
- 101 General
- 102 Specifications
- 104 Approved Media and Ribbon