advertisement
Importing from an audio CD
You can import audio from an audio CD and use it as a patch or audio phrase.
●
Unauthorized use, distribution, sale, lending, performance, or broadcast etc. of copyrighted material belonging to a third party is prohibited by law.
● Before you import from an audio CD
Carefully read the “Copyright” and “About the License Agreement” sections in the inside back cover of the Owner’s Manual. You must abide by these conditions when using imported audio material.
1.
In the CD drive, insert the audio CD that you want to import.
2.
Press [IMPORT].
The IMPORT screen (Screen Guide; p. 219) will appear.
3.
Press [F1](Select Drive).
The SELECT DRIVE popup (Screen Guide; p. 6) will appear.
4.
Use CURSOR [ ] [ ] to select the Audio CD, and press [F5](Select).
The CD-R/RW drive will be selected and list of the files on the audio CD will appear.
If no audio CD is inserted in the drive, the message “Drive not ready.” will appear. In this case, internal hard disk drive will be selected automatically.
5.
Move the cursor to the track number that you want to import from the audio CD.
●
You can press [F4](Preview) to audition. To stop auditioning, press [F4](Stop).
M-70
MV-8800 Owner’s Manual
6.
Press [F5](Import).
The SET TIME popup (Screen Guide; p. 225) will appear.
●
The SET TIME popup will appear if one CD track is being imported.
Importing from an audio CD
2
7.
Press [F5](Execute).
The data will be imported, and the RESULT popup (Screen Guide; p. 211) will appear, allowing you to check the data that was imported. A sample number will be assigned to each imported sample.
●
The sample number is shown above the waveform display.
●
If you want to use the imported data as a patch or audio phrase, use the Quick Assign function in step 8 of
MV-8800 Owner’s Manual
M-71
Importing from an audio CD
The options during import
By setting various options in the Import screen you can change the behavior of import.
● Applying emphasize while you import (Pre Emphasis)
1.
Make preparations for import as described in step 1–5 of “Importing from an audio CD” (p.
The MENU popup will appear.
2.
Select “Import Options” and press [F5](Select).
The IMPORT OPTIONS popup (Screen Guide; p. 222) will appear.
3.
Turn the Pre Emphasis parameter On.
The pre emphasis function will be processed.
●
The amount of time required to execute the emphasis.
●
The high frequency range of the inputted sample will be boosted when Pre Emphasis is On.
4.
Press [F1](Close).
Proceed with import as described in step 6 of “Importing from an audio CD” (p. 70).
● Automatically divide the sample at silent regions during import
1.
Make preparations for import as described in step 1–5 of “Importing from an audio CD” (p.
2.
Select “Import Options” and press [F5](Select).
The IMPORT OPTIONS popup (Screen Guide; p. 222) will appear.
3.
Turn the Auto Divide parameter On.
When a silent region is detected during import, the MV-8800 will automatically divide the sample.
4.
Set the Gap Time value.
Specifies the length of the silent regions that will be detected.
5.
Press [F5](Close).
Proceed with import as described in step 6 of “Importing from an audio CD” (p. 70).
●
A maximum of 96 samples can be divided.
M-72
MV-8800 Owner’s Manual
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project