Tamper Proof Statement. Palo Alto Networks WF-500, WF 500

Tamper Proof Statement

Chapter 2



Installing the Hardware

This chapter describes how to install the WF-500 appliance. For more information, see the following topics:

•

“Tamper Proof Statement” on page 9

•

“Before You Begin” in the next section

•

“Equipment Rack Installation” on page 10

•

“Connecting Cables to the Device” on page 18

•

“Connecting Power” on page 18

Tamper Proof Statement

To ensure that products purchased from Palo Alto Networks have not been tampered with during shipping, verify the following upon receipt of each product:

•

The tracking number provided to you electronically when ordering the product matches the tracking number that is physically labeled on the box or crate.

•

The integrity of the tamper-proof tape used to seal the box or crate has not been compromised.

•

The warranty seals on the device itself do not show evidence of tampering.

Before You Begin

•

It is recommended that two people are available to mount the WF-500 appliance in a 19inch rack.

•

Have a Phillips head screwdriver available and small pliers or a nut wrench.

•

Verify that the intended location has adequate air circulation and meets the temperature

requirements. See “Environmental Specifications” on page 24.

•

Unpack the device.

•

Verify that power is not connected to the WF-500 appliance.

•

Allow clear space on all sides of the WF-500 appliance.

Palo Alto Networks Installing the Hardware • 9