HP Cloud Network Manager Quick Start Guide

3.

Enter a unique passphrase, confirm the passphrase when prompted, and then click

Next. The Access details are displayed.

4.

Ensure that the Unrestricted access control is specified, and then click Finish. The new network is added and displayed in the Networks window.

For more information on configuring different types of wireless network such as

Employee, Guest, or Voice, see the HP Cloud Network Manager User Guide.

Verifying the operating status

After setting up an AP and creating wireless networks, observe the LEDs to verify the operating status.

For a description of the LED indicators, see the installation guides. The following table lists the Ethernet ports available on an AP and the corresponding status indication:

Table 1:

Ethernet port LED

AP model Ethernet port LED

HP 350

: Indicates the Ethernet uplink connection.

HP 355

: Indicates the Ethernet uplink connection.

HP Cloud Network Manager | Quick Start Guide 10

AP model

HP 365

Ethernet port LED

: Indicates the Ethernet 1 uplink connection.

: Indicates the wired Ethernet 2 downlink connection.

11 HP Cloud Network Manager | Quick Start Guide