Nexio Motion4 Server
Installation Reference
Overview
Overview
About this Document
This Installation Guide describes how to install and configure Nexio® Motion Server. This process applies to all versions of Nexio Motion Server, unless otherwise documented.
Application and Database Servers
This guide is based on an environment that has Motion Server set up across two servers: a database server and a single Motion Server with all components installed.
Alternatively, Motion Server can be set up across four servers: three application servers (Server API,
Core Services, and Device Manager Service) and a database server. If Nexio Motion is installed across multiple servers, apply the appropriate installation steps to the server that has multiple Nexio Motion components installed:
Server API Server: Install Wcf, Rest, and Database components.
Core Services Server: Install Core Services.
Device Manager Server: Install Device Manager Service.
Quick Install Reference
The new procedure is as followed:
Database Server
Motion Server
1. Create a user (local or domain) that will be used by the services. For details see Create Domain
Accounts (on page 19).
2. Run the Motion Server MSI and provide the user from #1 info. If not on a domain, the field can be
left empty. For details see Installing Nexio Motion Server Components (on page 21).
3. All the roles and dependencies are installed. This can take more than 10mn. This installs everything
(IIS, Magellan, HsMediaFile, etc.). For details see Installed Prerequisites (on page 20).
4. At the end of the installation, do not restart.
5. Run the DB tool. For details see Create the Nexio Motion database (on page 24).
6. Run the REST API Tool. For details see Configuring REST API (on page 26).
7. Run the server tool. For details see Configure the Server (on page 28).
© 2017 Imagine Communications Corp. Proprietary and Confidential. 4/12/2017 | Page 5
