- Computers & electronics
- Computer components
- Interface components
- Serial switch boxes
- GSS
- GSS.remote RLC 8
- User manual
advertisement
2.3 t eChniCal data
The devices meet the following EU directives:
2011/65/EU, 2014/30/EU, 2014/35/EU
The product fulfils the guidelines and standards for CE labelling (page 30).
Connections
LAN 1000-BASE-T ............................................................. 1 RJ-45 socket
RS-232: .................................................................... 8 Sub D 9-pin plugs
DC socket 2,1 / 5,5 mm for connecting up to 8 head-end stations and/or a monitoring cassette PSCU 6000/HSCU 6000
............................................................1
Netzwork ports:
TCP port 60002 (alternative 35000 – 60100, 61000 – 65000)
HTML port 80
DNS port 53 UDP/TCP
Monitoring cassette PSCU 6000 / HSCU 6000
The following items are signalled:
– Level of the output signal measured via PSCU 6000 / HSCU 6000
– BIT – error rate at QAM output signals
– Present line synchronizing signal at analogous PAL output signals
– Present RDS station name at FM output signals
– Quality of the input signal (good, poor and no signal) at QPSK-PAL double transmodulators as well as QPSK- QAM transmodulators
Remote control:
– Remote control is possible at all current cassettes and head-end stations of the Standard- and Profi Line.
Required index levels for remote control:
PSW 1000 index level: ≥ V65
BE-Remote index level: ≥ V45
- 4 - RLC 8
advertisement
Related manuals
advertisement
Table of contents
- 3 1 Safety regulations
- 3 2 General information
- 3 2.1 Packing contents
- 3 2.2 Meaning of the symbols used
- 4 2.3 Technical data
- 5 2.4 Description
- 6 2.5 PC / laptop system requirements
- 7 2.6 Overview of the management unit
- 8 3 Installation
- 8 Potential equalisation (PE)
- 9 3.2 Assembling a connection cable
- 9 3.3 Connecting components
- 10 4 Installing the software on a PC or laptop
- 10 3.1 Key Code (Activation Code) for the software
- 10 3.2 Installing the software
- 14 5 Connecting to a network
- 14 5.1 LAN configuration
- 16 5.2 Check the configuration at the control unit of the head-end station
- 17 6 Firmware update
- 18 7 Remote access via Internet