- Computers & electronics
- Computer components
- Interface components
- Serial switch boxes
- GSS
- GSS.remote RLC 8
- User manual
advertisement
5 C onneCting to a network
5.1 lan
Configur ation
The "static" (fixed) IP address 192.168.0.120 and Port 60002 is set to the
RLC 8.
If another IP address range is used in your network or this IP address is already in use, first the IP address of the RLC 8 must be changed. If several RLC 8 are used in the network, different IP addresses must be assigned for the RLCs:
• Set a static IP address to your PC which is in the address range of the RLC
8 (e.g. 192.168.0.2).
• Connect your PC directly to the RLC 8 via a LAN cable.
• Start any internet browser.
• Enter the IP address of the RLC 8 (http://192.168.0.120) at the address line of the browser and press the "Enter" button:
• Enter the user name "admin" and the password ("geheim" is the standard value) and click the "Login" button.
- 14 - RLC 8
• Enter the settings necessary for your network.
Use only ports in the range of 35000 – 60100 or 61000 – 65000!
On request change the password.
Note the settings!
• Click the "Apply" button in order to save the changes.
The changed settings are transmitted to the RLC 8.
The RLC 8 will be rebooted.
Now the RLC 8 is configured for your LAN network.
• Disconnect the LAN connection to your PC.
• Connect the RLC 8 to your network.
- 15 - RLC 8
advertisement
Related manuals
advertisement
Table of contents
- 3 1 Safety regulations
- 3 2 General information
- 3 2.1 Packing contents
- 3 2.2 Meaning of the symbols used
- 4 2.3 Technical data
- 5 2.4 Description
- 6 2.5 PC / laptop system requirements
- 7 2.6 Overview of the management unit
- 8 3 Installation
- 8 Potential equalisation (PE)
- 9 3.2 Assembling a connection cable
- 9 3.3 Connecting components
- 10 4 Installing the software on a PC or laptop
- 10 3.1 Key Code (Activation Code) for the software
- 10 3.2 Installing the software
- 14 5 Connecting to a network
- 14 5.1 LAN configuration
- 16 5.2 Check the configuration at the control unit of the head-end station
- 17 6 Firmware update
- 18 7 Remote access via Internet