5.2 C heCk the Configur ation at the Control unit of the head
end station
• Activate the "System information" software by simultaneously holding down the buttons and for more than 2 seconds in the "Selecting the cassette" mode.
—> The display darkens.
Afterwards the "System informatio n – control unit" –
"SYSTEM INFO: BE_Remote" menu appears.
—> The "System information" software also can be called up from the standby mode of the display.
SYSTEM
BE-Remote
INFO:
V 45
• Press the button so many times until the network configuration is shown in the display of the RLC 8.