advertisement
Cleaning the Printer
To keep your printer operating at its best, you should clean it thoroughly several times a year. Follow the steps below:
1. Make sure that the printer is turned off. Then remove the paper guide or the cut sheet feeder.
6-2 Maintenance
Cleaning the Printer
2. Using a soft brush, carefully remove all dust and dirt.
3. If the outer case or paper guide is dirty or dusty, clean it with a soft, clean cloth dampened with a mild detergent solution. Keep the printer cover in place to prevent water from getting inside the printer.
Maintenance 6-3
Cleaning the Printer r!!!b
WARNINGS: l
Never use alcohols or thinners to clean the printer, since these chemicals can damage the components as well as the case.
l l l
Be careful not to get water on the printer mechanism or electronic components.
Do not use a hard or abrasive brush.
Do not spray the inside of the printer with lubricants; unsuitable oils can damage the mechanism. Call the
Epson toll-free number (1-800-922-8911) if you think lubrication is needed.
6-4 Maintenance
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Fast print speeds of up to 192 characters per second
- High-quality output with a resolution of up to 64 characters per inch
- Automatic loading of single sheets of paper
- Built-in fonts: draft, Epson Roman, Epson Sans Serif, Epson Courier, Epson Prestige, Epson Script, OCR-A, OCR-B, Epson Orator, and Epson Orator-S