advertisement
4 | Dome CXtra
Dome CXtra Services
The following services constitute the Dome CXtra software.
RightLight™ – Assures backlight stabilization for your display panel, calibrates your panel to the DICOM Grayscale Standard Display
Function, automatically tests the calibration for conformance, allows manual conformance testing, and supports DICOM calibration at various color coordinates on Dome EX color displays. (Manual conformance testing requires the LCD or the LCD II photometer. Use only the LCD II photometer with Dome EX color displays.)
White Level Calibration – For displays using the RightLight service, calibrates the display photometer that stabilizes the white level.
(Calibration of the white level requires the LCD or the LCD II photometer. Use only the LCD II photometer with Dome EX color displays.)
DICal™ – Calibrates your display panel to the DICOM Grayscale
Standard Display Function, tests the calibration for conformance, and allows the selection of individual displays to run the service at any given time. (Custom calibration and manual conformance testing require the LCD or LCD II photometer.)
Backlight Saver – Extends the clinical life of your display by turning off panel backlights during periods of inactivity you define.
Test Patterns – Provides test images and allows use of custom test patterns for demonstrating and evaluating the performance of your display.
AAPM TG18 – Performs flat panel evaluations recommended by the American Association of Physicists in Medicine, Task Group 18.
DIN Test – Tests your display for compliance with German standard DIN 6868-57.
Privilege – Password-protects operating parameters of the display system.
Reporting – Collects, displays, and prints configuration data, characteristics, and event logs created by most other services.
Enterprise Management – Manages displays from a central location.
Requires SNMP console (not provided) for remote viewing.
The use of Dome CXtra services is display-dependent. Check the following table for display compatibility by service:
Service Dome CX Dome EX Dome QX GX2MP
Select
Desktop
RightLight 9 9
White Level
Calibration
*
DICal
Backlight Saver
Test Patterns
AAPM TG18
DIN Test
Privilege
Reporting
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
Enterprise
Management
9 9 9 9
* Restoration of factory White Level calibration available only on
Dome E2, Dome E3, Dome E3c, Dome E3cHB, and Dome E5 displays.
9
9
9
9
9
9
Getting Started | 5
advertisement
Related manuals
advertisement
Table of contents
- 7 Display Compatibility
- 8 Dome CXtra Services
- 10 System Requirements
- 10 Installing the Dome CXtra Software
- 11 Installing or Removing Services
- 12 Installing the Photometer
- 14 Starting Dome CXtra
- 15 Opening the Dome CXtra Services Menu
- 16 CXtra Utilities
- 16 Exiting Dome CXtra
- 16 Uninstalling Dome CXtra
- 18 Configuring the RightLight Service
- 27 Checking Conformance Manually
- 30 Checking Current Conformance Status
- 31 Reviewing Conformance Events
- 32 Reviewing Manual Conformance Data
- 37 Disabling RightLight Popup Warnings
- 44 Configuring the DICal Service
- 45 Using DICOM Response Function as Default Calibration
- 46 Choosing Display Calibration
- 48 Performing a Custom DICOM Calibration
- 49 Reviewing Calibration Events
- 50 Performing a Conformance Test
- 50 Reviewing Conformance Test Data
- 54 Reviewing Conformance Test Events
- 56 Advanced Options
- 58 AAPM TG18 Test Patterns
- 58 Miscellaneous Test Patterns
- 61 Displaying Test Patterns
- 62 Adding a Custom Test Pattern
- 64 Modifying or Deleting Custom Test Patterns
- 64 Dome Visual and Interactive Evaluations
- 70 Creating a Saver Period
- 72 Deleting a Saver Period
- 72 Viewing Schedule for Week
- 74 Setting Up for Testing
- 84 Running a DIN Acceptance Test
- 85 Running a DIN Constancy Test
- 87 Viewing DIN Test Results
- 90 AAPM TG18 Test Setup
- 96 Completing AAPM TG18 Tests
- 98 Viewing AAPM TG18 Test Results
- 100 Logging On as Privileged User/Administrator
- 101 Logging Out of Privileged Mode
- 101 Changing Your Password
- 102 Viewing Reports
- 106 Using the Reporting Control
- 109 SNMP Management Console
- 109 The SNMP Model
- 110 Configuring the SNMP Service