Deleting a Saver Period. Dome CXtra

68 | Dome CXtra

Deleting a Saver Period

To delete an existing saver period

1 Open the Dome CXtra Services menu and select Backlight Saver.

2 Click the associated data line and then click Delete Period.

Viewing Schedule for Week

To view the saver periods for a week

1 Open the Dome CXtra Services menu and select Backlight Saver.

2 Click View Week to see the schedule.

3 Click OK.

DIN Test Service

The DIN Test service tests your Dome CX, Dome EX, and Dome QX displays for conformance with German standard DIN 6868-57. A successful acceptance test such as the one performed by DIN Test service is mandatory before DIN 6868-57 application category A and

B devices

*

can be accepted in a hospital or other diagnostic setting.

For more information about DIN acceptance criteria, obtain a copy of the DIN 6868-57 standard through the following web site: http://www2.din.de.

Besides acceptance testing, the DIN Test service provides constancy testing. Constancy tests can be performed periodically after successful acceptance testing to detect any degradation in display performance. The tests detect degradation by measuring deviation from performance values recorded during the acceptance test.

* Application category A includes image display devices for the diagnosis of digital images taken by means of projection radiography, including storage phosphors or solid-state detectors, for example, of the skeleton, thorax or mamma. However, image display devices for the diagnosis of digital images from dental radiography, fluoroscopy, or subtraction angiography are not included in application category A.

Application category B includes all image display devices suitable for the diagnosis of digital images from dental radiography, fluoroscopy, and subtraction angiography as well as of images generated by means of sectional imaging procedures (such as computed tomography, magnetic resonance tomography, sonography) and nuclear-medical procedures.

DIN Test Service | 69