3 ActiveXperts Hydromagic 7.0

Supported Motion Sensors

TSS1 Compatible Motion Sensors;

SBG Systems SBG01;

Supported Total Stations

Total stations supporting the pseudo NMEA GGA format;

Total stations supporting the Trimble Geodimeter format;

2 Configuration

2.1

Installation

System Requirements

The software requires a system which is capable of running Microsoft Windows Vista or later. It will not work on earlier versions of this operating system.

The software is available as both a 32 and 64 bit version. Which one to use depends on the operating system you are running.

The 32 bit version will run on both 32 and 64 bit operating systems, but when running a 64 bit Windows version, we recommend using the 64 bit version of the software.

When you are going to post-process soundings (3D, contour generation, matrix generation etc.), we recommend a computer with at least a dual-core processor and 2 Gigabyte of free RAM. You will also need sufficient space on the hard disk to store maps, soundings and matrix files.

Installation

To start the installation, and you own a hardlock or dongle, run the setup_hydro_full.exe downloaded from the website , or from the program CD.

When you want to try the software, and you do not have a dongle yet, you should run the setup_hydro.exe which is a demo version with some exporting and printing functions disabled.

It is recommended to run the setup program as Administrator, as shown in the image below:

(C) 2015 ActiveXperts Software B.V.