INSTEON Configuring Wi-Fi Camera Owner's Manual
INSTEON Wi-Fi Camera is an easy-to-use device that will give you peace of mind. It is equipped with a night vision feature that will allow you to see what is happening in your home even when it is dark. The camera also has a built-in microphone and speaker, so you can hear and talk to people in your home from anywhere in the world. You can use the Insteon app to configure and control your camera, and to receive alerts when motion is detected. The camera can be configured to use either a wired Ethernet connection or a Wi-Fi connection, so you can place it anywhere in your home.
Oglas
Oglas
Insteon Wi-Fi Cameras
Owner’s Manual
Contents
Insteon app for iPhone, iPad and iPod touch
Configure a Camera for Wired Ethernet
Add an Already Configured Camera
Configure a Camera for Wired Ethernet
Configure a Camera for Wired Ethernet
3
Wi-Fi Camera
Overview
Day/Night Sensor
IR LEDs
Microphone
Front Back
Wi-Fi Antenna
10/100 Ethernet
External Microphone
External Speaker
5V Power
4
Wi-Fi Camera
Installation
Outlet Connections
Connect the power adapter to an outlet and connect the ethernet cable to your router.
Camera Connections
Connect the antenna, ethernet cable and DC power connector to your camera.
5
Wi-Fi Camera
Mounting
Mounting Bracket
Mount the optional bracket using screws and wall anchors. You can position the camera right-side up or upside down.
?
Different wall materials require different screws and anchors. Use the appropriate type for your mounting surface. Drywall screws and anchors have been provided. Use caution when drilling holes in walls that may contain live electrical wires.
6
Use the Insteon app to configure and control your Insteon Wi-Fi Camera.
The Insteon app requires Insteon Hub (2242-222) or (2245-222).
7
Configure a Camera for Wired Ethernet iPhone, iPad and iPod touch
Launch the Insteon App.
Tap the drawer icon or swipe from the right edge of the display to open the drawer.
Tap Add a Device.
Tap Camera.
If you have not already done so, connect your camera to power and your router using the supplied ethernet cable.
It can take up to two minutes for your camera to complete its startup process.
When ready, tap Next.
Select the camera that you would like to configure.
8
Give your camera a user name and password. This information is used to secure your camera.
When ready, tap Next.
Configure a Camera for Wired Ethernet iPhone, iPad and iPod touch
?
The maximum password length is 12 characters
The password must contain letters and numbers only; no special characters
(!@#$%^&*, etc.) are permitted
The password cannot contain spaces
If the Next button is disabled, your password does not meet the password restrictions.
Select Use Wired Ethernet and then tap Next.
Wait while your camera’s settings are updated.
To see your camera when you are away from home, you will need to configure manual remote access. Write down the
IP Address displayed at the bottom of the screen and tap Next.
Name your camera, select an icon and add it to a room.
9
Configure a Camera for Wired Ethernet iPhone, iPad and iPod touch
Scroll down and tap Port.
Change the port from 80 to 25106.
If you are setting up more than one camera, increase the port number for each successive camera to ensure that every camera has a unique port number.
When ready, tap Done.
Return to Settings by dismissing
Edit Camera and Add Device.
Tap House.
10
Configure a Camera for Wired Ethernet iPhone, iPad and iPod touch
Write down the Gateway IP address and Subnet Mask.
?
You should now have the following information:
• Camera IP Address
• Camera Port
• Gateway IP Address
• Subnet Mask
11
Assign a Static IP Address
Mac or PC
Download and launch the
Camera Setup Assistant from your Mac or PC.
insteon.com/csa
Right-click (or control-click) on a Mac) and select Network
Configuration.
Uncheck Obtain IP from DHCP
Server. IP Address, Subnet Mask,
Gateway and DNS Server will auto-populate.
Enter your camera password and click
OK. It may take up to two minutes for your camera to restart.
Visit insteon.com/remoteaccess for instructions on configuring remote access.
You’re done setting up your
Insteon Wi-Fi Camera.
?
If the fields are empty, enter the information gathered throughout this document.
Use Gateway IP Address for both Gateway and DNS
Server addresses.
12
Configure a Camera for Wi-Fi iPhone, iPad and iPod touch
Launch the Insteon App Tap the drawer icon or swipe from the right edge of the display to open the drawer
Tap Add a Device
Tap Camera If you have not already done so, connect your camera to power and your router using the supplied ethernet cable.
It can take up to two minutes for your camera to complete its startup process.
When ready, tap Next.
Select the camera that you would like to configure
13
Configure a Camera for Wi-Fi iPhone, iPad and iPod touch
Give your camera a user name and password. This information is used to secure your camera.
When ready, tap Next.
Tap Use Wi-Fi and select your network from the list. If you don’t see your network, ensure that you’ve connected the antenna to your camera.
Enter your Wi-Fi network password and tap Next
Disconnect the ethernet cable from your camera and restart the camera by disconnecting and then reconnecting your camera’s power cable.
If you do not disconnect the ethernet cable, your camera will not switch to Wi-Fi.
To see your camera when you are away from home, you will need to configure manual remote access. Write down the
IP Address displayed at the bottom of the screen and tap Next.
Name your camera, select an icon and add it to a room.
14
Configure a Camera for Wi-Fi iPhone, iPad and iPod touch
Scroll down and tap Port.
Change the port from 80 to 25106.
If you are setting up more than one camera, increase the port number for each successive camera to ensure that every camera has a unique port number.
When ready, tap Done.
Return to Settings by dismissing
Edit Camera and Add Device.
Tap House.
15
Configure a Camera for Wi-Fi iPhone, iPad and iPod touch
Write down the Gateway IP address and Subnet Mask.
?
You should now have the following information:
• Camera IP Address
• Camera Port
• Gateway IP Address
• Subnet Mask
16
Assign a Static IP Address
Mac or PC
Download and launch the
Camera Setup Assistant from your Mac or PC.
insteon.com/csa
Right-click (or control-click) on a Mac) and select Network
Configuration.
Uncheck Obtain IP from DHCP
Server. IP Address, Subnet Mask,
Gateway and DNS Server will auto-populate.
Enter your camera password and click
OK. It may take up to two minutes for your camera to restart.
Visit insteon.com/remoteaccess for instructions on configuring remote access.
You’re done setting up your
Insteon Wi-Fi Camera.
?
If the fields are empty, enter the information gathered throughout this document.
Use Gateway IP Address for both Gateway and DNS
Server addresses.
17
Add an Already Configured Camera iPhone, iPad and iPod touch
Add an already configured camera if you have already setup an Insteon Wi-Fi Camera using its web browser interface or would like to re-add a camera that was previously configured using the Insteon app.
Launch the Insteon App Tap the drawer icon or swipe from the right edge of the display to open the drawer
Tap Add a Device
18
Add an Already Configured Camera iPhone, iPad and iPod touch
Tap Camera Tap Next.
Select that camera that you would like to add from the list of cameras
19
Add an Already Configured Camera iPhone, iPad and iPod touch
Enter your camera’s user name and password. When ready, tap Next.
To see your camera when you are away from home, you will need to configure manual remote access. Write down the
IP Address displayed at the bottom of the screen and tap Next.
?
If you have not already done so, you will need to configure manual remote access to see your camera when you are away from home. Follow these steps to Configure Manual
Remote Access.
Name your camera, select an icon and add it to a room.
When finished, tap Done.
You’re done setting up your
Insteon Wi-Fi Camera.
20
Add a Remote Camera iPhone, iPad and iPod touch
Add a remote camera if your camera has been previously setup and is not located on your local network.
Launch the Insteon App Tap the drawer icon or swipe from the right edge of the display to open the drawer
Tap Add a Device
21
Add a Remote Camera iPhone, iPad and iPod touch
Tap Camera Tap Next.
Tap My Camera Isn’t Listed
Tap Add a Remote Camera Enter your camera’s IP address or URL, port, user name and password. When ready, tap Done.
Name your camera, select an icon and add it to a room.
When finished, tap Done.
You’re done setting up your
Insteon Wi-Fi Camera.
22
Advanced Camera Configuration iPhone, iPad and iPod touch
Use advanced camera configuration if you would like to enter all of your camera’s network information at once or if you would like to control options like DHCP, IP address and port.
Launch the Insteon App Tap the drawer icon or swipe from the right edge of the display to open the drawer
Tap Add a Device
23
Advanced Camera Configuration iPhone, iPad and iPod touch
Tap Camera If you have not already done so, connect your camera to power and your router using the supplied ethernet cable.
It can take up to two minutes for your camera to complete its startup process.
When ready, tap Next.
Select that camera that you would like to configure from the list of cameras
24
Advanced Camera Configuration iPhone, iPad and iPod touch
Tap Advanced Setup Configure your camera as desired and tap Next
Wait while your camera’s settings are updated
If you have not already done so, you will need to configure manual remote access to see your camera when you are away from home.
Follow these steps to Configure
Manual Remote Access.
Name your camera, select an icon and add it to a room. When finished, tap Done.
You’re done setting up your
Insteon Wi-Fi Camera.
25
Use the Insteon app to configure and control your Insteon Wi-Fi Camera.
The Insteon app requires Insteon Hub (2242-222) or (2245-222).
26
Configure a Camera for Wired Ethernet
Android
Launch the Insteon App Navigate to Settings by tapping Edit Settings from the
Settings button
Tap Devices
Tap the Add button Tap Camera Tap Play to watch the setup video or tap Skip Video to continue with setup.
27
Configure a Camera for Wired Ethernet
Android
?
The maximum password length is 12 characters
The password must contain letters and numbers only; no special characters
(!@#$%^&*, etc.) are permitted
The password cannot contain spaces
If the Next button is disabled, your password does not meet the password restrictions.
If you have not already done so, connect your camera to power and your router using the supplied ethernet cable. It can take up to two minutes for your camera to complete its startup process. When ready, tap OK.
Give your camera a user name and password. This information is used to secure your camera.
When ready, tap Yes.
Tap Use hardwired with an
Ethernet cable
Wait while your camera’s settings are updated
Name your camera, select an icon and add it to a room.
28
Configure a Camera for Wired Ethernet
Android
Scroll down and write down the
Local IP Address and IP Port.
When ready, tap Done.
Return to Settings by tapping Edit
Settings from the Settings button.
Tap House Write down the Gateway
IP address and Subnet Mask.
29
Assign a Static IP Address
Mac or PC
Download and launch the
Camera Setup Assistant from your Mac or PC.
insteon.com/csa
Right-click (or control-click) on a Mac) and select Network
Configuration.
Uncheck Obtain IP from DHCP
Server. IP Address, Subnet Mask,
Gateway and DNS Server will auto-populate.
Enter your camera password and click
OK. It may take up to two minutes for your camera to restart.
Visit insteon.com/remoteaccess for instructions on configuring remote access.
You’re done setting up your
Insteon Wi-Fi Camera.
?
If the fields are empty, enter the information gathered throughout this document.
Use Gateway IP Address for both Gateway and DNS
Server addresses.
30
Configure a Camera for Wi-Fi
Android
Launch the Insteon App Navigate to Settings by tapping Edit Settings from the
Settings button
Tap Devices
Tap the Add button Tap Camera Tap Play to watch the setup video or tap Skip Video to continue with setup.
31
Configure a Camera for Wi-Fi
Android
If you have not already done so, connect your camera to power and your router using the supplied ethernet cable. It can take up to two minutes for your camera to complete its startup process. When ready, tap OK.
Give your camera a user name and password. This information is used to secure your camera.
When ready, tap Yes.
?
The maximum password length is 12 characters
The password must contain letters and numbers only; no special characters
(!@#$%^&*, etc.) are permitted
The password cannot contain spaces
If the Next button is disabled, your password does not meet the password restrictions.
Chose the Wi-Fi option that applies for your network: password-protected or open.
Enter your Wi-Fi network’s password and tap Done
Wait while your camera’s settings are updated
32
Configure a Camera for Wi-Fi
Android
When prompted, disconnect the ethernet cable from your camera and tap Next
Wait while your camera’s settings are updated
Name your camera, select an icon and add it to a room.
Scroll down and write down the
Local IP Address and IP Port.
When ready, tap Done.
Return to Settings by tapping
Edit Settings from the
Settings button.
Tap House
33
Configure a Camera for Wi-Fi
Android
Write down the Gateway IP address and Subnet Mask.
34
Assign a Static IP Address
Mac or PC
Download and launch the
Camera Setup Assistant from your Mac or PC.
insteon.com/csa
Right-click (or control-click) on a Mac) and select Network
Configuration.
Uncheck Obtain IP from DHCP
Server. IP Address, Subnet Mask,
Gateway and DNS Server will auto-populate.
Enter your camera password and click
OK. It may take up to two minutes for your camera to restart.
Visit insteon.com/remoteaccess for instructions on configuring remote access.
You’re done setting up your
Insteon Wi-Fi Camera.
?
If the fields are empty, enter the information gathered throughout this document.
Use Gateway IP Address for both Gateway and DNS
Server addresses.
35
If you don’t have Insteon Hub and the Insteon app, you can setup your
Wi-Fi Camera from your Mac or PC.
36
Configure a Camera for Wired Ethernet
Mac or PC
Download and launch the
Camera Setup Assistant from your Mac or PC.
insteon.com/csa
Double-click the camera that you would like to configure.
Enter the camera’s default account credentials. When ready, click Log In.
Default User Name: “admin”
Default Password: blank
Click the button that corresponds to your computer’s internet browser. This guide assumes you are using Firefox,
Chrome or Safari.
37
Configure a Camera for Wired Ethernet
Mac or PC
Click Device Management Click Alias Settings
Give your camera a name. When ready, click Submit.
Click Users Settings
38
Configure a Camera for Wired Ethernet
Mac or PC
?
The maximum password length is 12 characters
The password must contain letters and numbers only; no special characters
(!@#$%^&*, etc.) are permitted
The password cannot contain spaces
If the Next button is disabled, your password does not meet the password restrictions.
Enter a password for the admin user account. This information is used to secure your camera.
When ready, click Submit.
When prompted, enter your camera’s new password and click Log In.
Click Basic Network Settings
39
Configure a Camera for Wired Ethernet
Mac or PC
Change the port from 80 to 25106.
If you are setting up more than one camera, increase the port number for each successive camera to ensure that every camera has a unique port number.
When ready, click Submit.
Close your browser and return to the
Insteon Camera Setup Assistant.
Write down the IP address displayed to the right of the camera name.
Right-click (or control-click on a Mac) and select Network Configuration.
Uncheck Obtain IP from DHCP
Server. IP Address, Subnet Mask,
Gateway and DNS Server should auto-populate.
?
If the fields are empty, enter the information gathered throughout this document.
Use Gateway IP Address for both Gateway and DNS
Server addresses.
40
Configure a Camera for Wired Ethernet
Mac or PC
Enter your camera password and click OK. It may take up to two minutes for your camera to restart.
Visit insteon.com/remoteaccess for instructions on configuring remote access.
You’re done setting up your
Insteon Wi-Fi Camera.
41
Configure a Camera for Wi-Fi
Mac or PC
Download and launch the
Camera Setup Assistant from your Mac or PC.
insteon.com/csa
Double-click the camera that you would like to configure.
Enter the camera’s default account credentials. When ready, click Log In.
Default User Name: “admin”
Default Password: blank
Click the button that corresponds to your computer’s internet browser. This guide assumes you are using Firefox,
Chrome or Safari.
42
Configure a Camera for Wi-Fi
Mac or PC
Click Device Management Click Alias Settings
Give your camera a name. When ready, click Submit.
Click Users Settings
43
Configure a Camera for Wi-Fi
Mac or PC
?
The maximum password length is 12 characters
The password must contain letters and numbers only; no special characters
(!@#$%^&*, etc.) are permitted
The password cannot contain spaces
If the Next button is disabled, your password does not meet the password restrictions.
Enter a password for the admin user account. This information is used to secure your camera.
When ready, click Submit.
When prompted, enter your camera’s new password and click Log In.
Click Basic Network Settings
44
Configure a Camera for Wi-Fi
Mac or PC
Change the port from 80 to 25106.
If you are setting up more than one camera, increase the port number for each successive camera to ensure that every camera has a unique port number.
When ready, click Submit.
Close your browser and return to the Insteon
Camera Setup Assistant.
It can take up to two minutes for your camera to restart. When complete, it will reappear in the
Camera Assistant. Double-click your camera to return to the web interface.
Click Wireless LAN Settings Click Scan
45
Configure a Camera for Wi-Fi
Mac or PC
Select your Wi-Fi Network from the list. If you don’t see your network, ensure that you’ve connected the antenna to your camera.
Enter your Wi-Fi Network password and click Submit.
After clicking Submit, disconnect the ethernet cable from your camera and close your browser. It make take up to two minutes for your camera to restart.
If you do not disconnect the ethernet cable, your camera will not switch to
Wi-Fi.
Return to the Insteon Camera Setup
Assistant. Your camera should be automatically detected.
Write down the IP address displayed to the right of the camera name.
46
Configure a Camera for Wi-Fi
Mac or PC
Right-click (or control-click on a Mac) and select Network Configuration.
Uncheck Obtain IP from DHCP
Server. IP Address, Subnet Mask,
Gateway and DNS Server should auto-populate.
Enter your camera password and click
OK. It may take up to two minutes for your camera to restart.
Visit insteon.com/remoteaccess for instructions on configuring remote access.
You’re done setting up your
Insteon Wi-Fi Camera.
47
Use the web browser interface to configure advanced settings on your camera.
48
Web Interface
Many camera settings can only be modified using the camera’s web browser interface.
Information on configuring supported settings can be found on insteon.com/support .
49
Camera Setup Assistant
Use the Camera Setup Assistant to find your Insteon Wi-Fi
Camera on your network to administer changes or update firmware using the camera’s web browser interface.
Camera Setup Assistant for OS X
Requires Mac OS X 10.7 or higher
Camera Setup Assistant for Windows
Requires Windows 7 or higher
50
Firmware Update
For detailed firmware update instructions, visit
insteon.com/camera-firmware
51
Restore all settings by performing a factory reset. Configured users, passwords, network settings and more are all erased and restored to factory defaults.
52
Factory Reset
Ensure your camera is connected to power and then press and hold the reset button for 30 seconds.
Indoor Camera
Use a straightened paper clip to depress the recessed reset button located on the bottom of the camera for 30 seconds.
53
54
Specifications
General
Available Colors White (Indoor)
Black (Indoor)
Brand: Insteon
Manufacturer Product No.: 75790WH White (Indoor)
75790 Black (Indoor)
UPC: 813922015997 White (Indoor)
813922015898 Black (Indoor)
Warranty: 90 days, limited
Mechanical
Dimensions 5.1” H x 4.1” W x 5.7” D
130mm H x 104mm W x 145mm D
Enclosure Material UV stabilized plastic
Mounting Tabletop or Wall Mount
Operating Environment Indoors
Operating Humidity Range 10-80% relative humidity, non-condensing
Operating Temperature Range 14º to 122º F
10º to 50º C
Factory Reset Button Yes
Storage Temperature Range -4º to 140º F
-20º to 60º C
Weight 10.9 oz
310 g
Electrical
Power Consumption 10 Watts Max
Supply Voltage 100-240 Volts AC, 50/60 Hertz, single phase
DC Power Supply 5V, 2A
Power Connector 3.5mm DC Barrel Connector
Certification CE
FCC
RoHS
55
System Requirements
Operating System Microsoft Windows 7 or later
Mac OS X 10.7 or later
Apple iOS 7 or later
Android 2.2 or later
Browser Compatibility A list of supported browsers can be found on insteon.com/support
Network
Ethernet Support One 10/100 RJ45 port
Wi-Fi Support iEEE 802.11 b/g
802.11b at 11Mbps max
802.11g at 54 Mbps max
Wi-Fi Security Support WEP
WPA
WPA2
Network Protocols IP, TCP, UDP, HTTP, HTTPS, SMTP, FTP, DHCP, DDNS, UPnP
Video
Image Sensor 0.3 Megapixel Color CMOS Sensor
Image Sensor Resolution 640 x 480
Minimum Illumination 0 Lux (using IR illumination)
Lens Type Glass Lens
Focal Length f:2.8mm
Field of View 70º
Image Compression MJPEG
Frame Rate VGA 30 FPS Maximum
Supported Resolutions VGA 640 x 480
QGVA 320 x 240
Image Adjustment Flip
Mirror
Pan and Tilt 300º Horizontal Pan
120º Vertical Tilt
56
Troubleshooting
For detailed troubleshooting information, visit
insteon.com/support
57
Certifications and Warnings
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the installation manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.
FCC Caution
Any changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
58
Declaration of Conformity
In 2002, the European Union introduced the Directive on Waste Electrical and Electronic Equipment (WEEE).
The main aim of the Directive is to ensure that WEEE is collected and treated separately. WEEE may contain hazardous substances that should not end-up in the (human) environment because it can have adverse effects on it.Furthermore, WEEE is a vast source of raw materials. With the ever-rising worldwide demand for new equipment and the ever-decreasing volume of raw materials in nature, letting this potential source of such materials go to waste is unacceptable. If equipment is collected separately, the equipment can be recycled and up to 85 to 90% of the equipment can be reused as new material, saving the use of virgin raw materials and energy of producing these. Separate collection and treatment of WEEE will thus decrease CO2 emissions as well. For the above reasons, Insteon expects end-users to dispose of the material in an environmentally friendly way through separate collection and treatment. Electrical and Electronic Equipment is labeled with the following ‘crossed out wheeled bin’ symbol indicating that the equipment should be disposed of, by the enduser, separate from other types of waste. End-users should contact their dealer/distributor or our company on disposal, collection and recycling options in their country.
59
Product Warranty
Limited Warranty
Seller warrants to the original consumer purchaser of this product that, for a period of 90 days from the date of purchase, this product will be free from defects in material and workmanship and will perform in substantial conformity to the description of the product in this Owner’s Manual. This warranty shall not apply to defects or errors caused by misuse or neglect. If the product is found to be defective in material or workmanship, or if the product does not perform as warranted above during the warranty period, Seller will either repair it, replace it, or refund the purchase price, at its option, upon receipt of the product at the address below, postage prepaid, with proof of the date of purchase and an explanation of the defect or error. The repair, replacement, or refund that is provided for above shall be the full extent of Seller’s liability with respect to this product. For repair or replacement during the warranty period, call 866-243-8022 with the Model # and Revision # of the device to receive an RMA# and send the product, along with all other required materials to:
Insteon
ATTN: Receiving
16542 Millikan Ave.
Irvine, CA 92606-5027
Limitations
The above warranty is in lieu of and Seller disclaims all other warranties, whether oral or written, express or implied, including any warranty or merchantability or fitness for a particular purpose. Any implied warranty, including any warranty of merchantability or fitness for a particular purpose, which may not be disclaimed or supplanted as provided above shall be limited to the two-year of the express warranty above. No other representation or claim of any nature by any person shall be binding upon Seller or modify the terms of the above warranty and disclaimer.
Home automation devices have the risk of failure to operate, incorrect operation, or electrical or mechanical tampering. For optimal use, manually verify the device state. Any home automation device should be viewed as a convenience, but not as a sole method for controlling your home.
In no event shall Seller be liable for special, incidental, consequential, or other damages resulting from possession or use of this device, including without limitation damage to property and, to the extent permitted by law, personal injury, even if Seller knew or should have known of the possibility of such damages. Some states do not allow limitations on how long an implied warranty lasts and/or the exclusion or limitation of damages, in which case the above limitations and/or exclusions may not apply to you. You may also have other legal rights that may vary from state to state.
Protected under U.S. and foreign patents (see www.insteon.com/patents)
©2016 Insteon Rev 06.30.16
60
Preuzimanje
Oglas