Advanced Camera Configuration. INSTEON Configuring Wi-Fi Camera, Wi-Fi Camera
INSTEON Wi-Fi Camera is an easy-to-use device that will give you peace of mind. It is equipped with a night vision feature that will allow you to see what is happening in your home even when it is dark. The camera also has a built-in microphone and speaker, so you can hear and talk to people in your home from anywhere in the world. You can use the Insteon app to configure and control your camera, and to receive alerts when motion is detected. The camera can be configured to use either a wired Ethernet connection or a Wi-Fi connection, so you can place it anywhere in your home.
تبلیغات
تبلیغات
Advanced Camera Configuration iPhone, iPad and iPod touch
Use advanced camera configuration if you would like to enter all of your camera’s network information at once or if you would like to control options like DHCP, IP address and port.
Launch the Insteon App Tap the drawer icon or swipe from the right edge of the display to open the drawer
Tap Add a Device
23
Advanced Camera Configuration iPhone, iPad and iPod touch
Tap Camera If you have not already done so, connect your camera to power and your router using the supplied ethernet cable.
It can take up to two minutes for your camera to complete its startup process.
When ready, tap Next.
Select that camera that you would like to configure from the list of cameras
24
Advanced Camera Configuration iPhone, iPad and iPod touch
Tap Advanced Setup Configure your camera as desired and tap Next
Wait while your camera’s settings are updated
If you have not already done so, you will need to configure manual remote access to see your camera when you are away from home.
Follow these steps to Configure
Manual Remote Access.
Name your camera, select an icon and add it to a room. When finished, tap Done.
You’re done setting up your
Insteon Wi-Fi Camera.
25
Use the Insteon app to configure and control your Insteon Wi-Fi Camera.
The Insteon app requires Insteon Hub (2242-222) or (2245-222).
26
دانلود
تبلیغات