Add an Already Configured Camera. INSTEON Configuring Wi-Fi Camera, Wi-Fi Camera
INSTEON Wi-Fi Camera is an easy-to-use device that will give you peace of mind. It is equipped with a night vision feature that will allow you to see what is happening in your home even when it is dark. The camera also has a built-in microphone and speaker, so you can hear and talk to people in your home from anywhere in the world. You can use the Insteon app to configure and control your camera, and to receive alerts when motion is detected. The camera can be configured to use either a wired Ethernet connection or a Wi-Fi connection, so you can place it anywhere in your home.
विज्ञापन
विज्ञापन
Add an Already Configured Camera iPhone, iPad and iPod touch
Add an already configured camera if you have already setup an Insteon Wi-Fi Camera using its web browser interface or would like to re-add a camera that was previously configured using the Insteon app.
Launch the Insteon App Tap the drawer icon or swipe from the right edge of the display to open the drawer
Tap Add a Device
18
Add an Already Configured Camera iPhone, iPad and iPod touch
Tap Camera Tap Next.
Select that camera that you would like to add from the list of cameras
19
Add an Already Configured Camera iPhone, iPad and iPod touch
Enter your camera’s user name and password. When ready, tap Next.
To see your camera when you are away from home, you will need to configure manual remote access. Write down the
IP Address displayed at the bottom of the screen and tap Next.
?
If you have not already done so, you will need to configure manual remote access to see your camera when you are away from home. Follow these steps to Configure Manual
Remote Access.
Name your camera, select an icon and add it to a room.
When finished, tap Done.
You’re done setting up your
Insteon Wi-Fi Camera.
20
डाउनलोड
विज्ञापन