Configure a Camera for Wi-Fi. INSTEON Configuring Wi-Fi Camera, Wi-Fi Camera
INSTEON Wi-Fi Camera is an easy-to-use device that will give you peace of mind. It is equipped with a night vision feature that will allow you to see what is happening in your home even when it is dark. The camera also has a built-in microphone and speaker, so you can hear and talk to people in your home from anywhere in the world. You can use the Insteon app to configure and control your camera, and to receive alerts when motion is detected. The camera can be configured to use either a wired Ethernet connection or a Wi-Fi connection, so you can place it anywhere in your home.
विज्ञापन
विज्ञापन
Configure a Camera for Wi-Fi
Android
Launch the Insteon App Navigate to Settings by tapping Edit Settings from the
Settings button
Tap Devices
Tap the Add button Tap Camera Tap Play to watch the setup video or tap Skip Video to continue with setup.
31
Configure a Camera for Wi-Fi
Android
If you have not already done so, connect your camera to power and your router using the supplied ethernet cable. It can take up to two minutes for your camera to complete its startup process. When ready, tap OK.
Give your camera a user name and password. This information is used to secure your camera.
When ready, tap Yes.
?
The maximum password length is 12 characters
The password must contain letters and numbers only; no special characters
(!@#$%^&*, etc.) are permitted
The password cannot contain spaces
If the Next button is disabled, your password does not meet the password restrictions.
Chose the Wi-Fi option that applies for your network: password-protected or open.
Enter your Wi-Fi network’s password and tap Done
Wait while your camera’s settings are updated
32
Configure a Camera for Wi-Fi
Android
When prompted, disconnect the ethernet cable from your camera and tap Next
Wait while your camera’s settings are updated
Name your camera, select an icon and add it to a room.
Scroll down and write down the
Local IP Address and IP Port.
When ready, tap Done.
Return to Settings by tapping
Edit Settings from the
Settings button.
Tap House
33
Configure a Camera for Wi-Fi
Android
Write down the Gateway IP address and Subnet Mask.
34
Assign a Static IP Address
Mac or PC
Download and launch the
Camera Setup Assistant from your Mac or PC.
insteon.com/csa
Right-click (or control-click) on a Mac) and select Network
Configuration.
Uncheck Obtain IP from DHCP
Server. IP Address, Subnet Mask,
Gateway and DNS Server will auto-populate.
Enter your camera password and click
OK. It may take up to two minutes for your camera to restart.
Visit insteon.com/remoteaccess for instructions on configuring remote access.
You’re done setting up your
Insteon Wi-Fi Camera.
?
If the fields are empty, enter the information gathered throughout this document.
Use Gateway IP Address for both Gateway and DNS
Server addresses.
35
If you don’t have Insteon Hub and the Insteon app, you can setup your
Wi-Fi Camera from your Mac or PC.
36
डाउनलोड
विज्ञापन