STD7NM80, STD7NM80-1
STF7NM80, STP7NM80
Datasheet
N-channel 800 V, 0.95 Ω typ., 6.5 A MDmesh™ II Power MOSFETs in
DPAK, IPAK, TO-220FP and TO-220 packages
TAB
IPAK
3
1
2
TAB
TAB
DPAK
1
2 3
TO-220FP
1
2
3
TO-220
1
2
3
D(2)
G(1)
S(3)
AM01475v1_noZen_noTab
Features
Order codes V
DS
STD7NM80
STD7NM80-1
800 V
STF7NM80
STP7NM80
• 100% avalanche tested
• Low input capacitance and gate charge
• Low gate input resistance
R
DS(on) max.
1.05 Ω
I
D
6.5 A
Applications
• Switching applications
Description
These devices are N-channel Power MOSFETs developed using the second generation of MDmesh™ technology. These revolutionary Power MOSFETs associate a vertical structure to the company’s strip layout to yield one of the world’s lowest on-resistance and gate charge. They are therefore suitable for the most demanding high-efficiency converters.
Product status
STD7NM80
STD7NM80-1
STF7NM80
STP7NM80
DS4854 - Rev 4 - August 2018
For further information contact your local STMicroelectronics sales office.
www.st.com
1
STD7NM80, STD7NM80-1, STF7NM80, STP7NM80
Electrical ratings
Electrical ratings
Table 1. Absolute maximum ratings
Symbol Parameter
V
DS
V
GS
I
D
I
D
I
DM
(2)
P
TOT
Drain-source voltage
Gate-source voltage
Drain current (continuous) at T
C
Drain current (continuous) at T
C
Drain current (pulsed)
= 25 °C
= 100 °C
V
ISO
Total dissipation at T
C
= 25 °C
Insulation withstand voltage (RMS) from all three leads to external heat sink (t = 1 s; T
C
= 25 °C)
Operating junction temperature range T j
T stg
Storage temperature range
1. Limited by maximum junction temperature.
2. Pulse width limited by safe operating area.
Value
DPAK, IPAK,
TO-220
TO-220FP
800
±30
6.5
4
26
6.5
(1)
4
(1)
26 (1)
90
-55 to 150
25
2.5
Symbol Parameter
DPAK
R
R
R thj-case thj-amb thj-pcb
(1)
Thermal resistance junction-case
Thermal resistance junction-ambient
Thermal resistance junction-pcb
1.4
50
1. When mounted on 1inch² FR-4 board, 2 oz Cu.
Table 2. Thermal data
Value
IPAK
100
TO-220FP
5
62.5
TO-220
1.4
Unit
°C/W
°C/W
°C/W
Unit
A
A
V
V
A
W kV
°C
Symbol
I
AS
E
AS
Table 3. Avalanche characteristics
Parameter
Avalanche current, repetitive or not-repetitive
(pulse width limited by T jmax
)
Single pulse avalanche energy
(starting T j
= 25 °C, I
D
= I
AS
, V
DD
= 50 V)
Value
1
240
Unit
A mJ
DS4854 - Rev 4 page 2/24
2
STD7NM80, STD7NM80-1, STF7NM80, STP7NM80
Electrical characteristics
Electrical characteristics
(T
CASE
= 25 °C unless otherwise specified)
Table 4. On/off states
Symbol
V
(BR)DSS
Parameter
Drain-source breakdown voltage
I
D
Test condition
= 1 mA, V
GS
= 0 V
V
R
I
I
DSS
GSS
GS(th)
DS(on)
Zero gate voltage drain current
Gate body leakage current
Gate threshold voltage
Static drain-source onresistance
V
GS
= 0 V, V
DS
= 800 V
V
GS
= 0 V, V
DS
= 800 V,
T
C
= 125 °C (1)
V
V
DS
V
DS
GS
1. Defined by design, not subject to production test.
= 0 V, V
= V
GS
GS
, I
D
= 10 V, I
D
= ±30 V
= 250 µA
= 3.25 A
Symbol
C iss
C oss
C rss
Rg
Q g
Q gs
Q gd
Table 5. Dynamic
Parameter
Input capacitance
Output capacitance
Reverse transfer capacitance
Gate input resistance
Total gate charge
Gate-source charge
Gate-drain charge
Test condition
V
DS
= 50 V, f = 1 MHz,
V
GS
= 0 V f = 1 MHz open drain
V
DD
V
GS
= 640 V, I
D
= 6.5 A,
= 0 to 10 V (see Figure
17. Test circuit for gate charge behavior )
Min.
800
3
-
-
Min.
-
Typ.
Max.
4
0.95
10
100
±100
5
1.05
µA nA
V
Ω
Unit
V
µA
15
7
18
4
Typ.
620
460
11
-
-
Max.
-
Unit pF
Ω nC
Symbol t d(on) t r t d(off) t f
Parameter
Turn-on delay time
Rise time
Turn-off delay time
Fall time
Table 6. Switching times
Test condition
V
DD
= 400 V, I
D
= 3.25 A,
R
G
= 4.7 Ω, V
GS
= 10 V
(see Figure 16. Test circuit for resistive load switching times
and
Figure 21. Switching time waveform )
Min.
-
Typ.
20
8
35
10
Max.
-
Unit ns
Symbol
I
SD
I
SDM
(1)
Parameter
Source-drain current
Source-drain current (pulsed)
Table 7. Source-drain diode
Test condition Min.
-
Typ.
Max.
6.5
26
Unit
A
DS4854 - Rev 4 page 3/24
STD7NM80, STD7NM80-1, STF7NM80, STP7NM80
Electrical characteristics
Symbol
V
SD
(2)
t rr
I
I
Q rr
RRM t
Q rr rr
RRM
Parameter
Forward on voltage
Reverse recovery time
Reverse recovery charge
Reverse recovery current
Reverse recovery time
Reverse recovery charge
Reverse recovery current
Test condition
I
SD
= 6.5 A, V
GS
= 0 V
I
SD
= 6.5 A, di/dt = 100 V
V
DD
= 50 V (see
Figure
18. Test circuit for inductive load switching and diode recovery times )
I
SD
= 6.5 A, di/dt = 100 A/µs
V
DD
= 50 V (see
Figure
18. Test circuit for inductive load switching and diode recovery times )
1. Pulse width limited by safe operating area.
2. Pulsed: pulse duration = 300 μs, duty cycle 1.5%.
Min.
-
-
-
Typ.
Max.
1.3
460
4
17
680
6
17
Unit
V ns
μC
A ns
μC
A
DS4854 - Rev 4 page 4/24
STD7NM80, STD7NM80-1, STF7NM80, STP7NM80
Electrical characteristics (curves)
2.1
Electrical characteristics (curves)
Figure 1. Safe operating area for DPAK and IPAK Figure 2. Thermal impedance for DPAK and IPAK
K
GC20460
Figure 3. Safe operating area for TO-220FP
Figure 5. Safe operating area for TO-220
10 0
10 -1
10 -2
10 -5 10 -4 10 -3 10 -2 10 -1 t p
(s)
Figure 4. Thermal impedance for TO-220FP
K GC20940
10 -1
10 -2
10 -3
10 -4 10 -3 10 -2 10 -1 10 0 t p
(s)
Figure 6. Thermal impedance for TO-220
DS4854 - Rev 4 page 5/24
Figure 7. Output characterisics
STD7NM80, STD7NM80-1, STF7NM80, STP7NM80
Electrical characteristics (curves)
Figure 8. Transfer characteristics
Figure 9. Static drain-source on-resistance Figure 10. Gate charge vs gate-source voltage
Figure 11. Capacitance variations
Figure 12. Normalized gate threshold voltage vs temperature
2
DS4854 - Rev 4 page 6/24
STD7NM80, STD7NM80-1, STF7NM80, STP7NM80
Electrical characteristics (curves)
Figure 13. Normalized on-resistance vs temperature Figure 14. Source-drain diode forward characteristics
Figure 15. Normalized V
(BR)DSS
vs temperature
8
DS4854 - Rev 4 page 7/24
STD7NM80, STD7NM80-1, STF7NM80, STP7NM80
Test circuits
3
Test circuits
Figure 16. Test circuit for resistive load switching times
V
GS pulse width
V
D
R
G
R
L
+
2200
μF
3.3
μF
D.U.T.
V
DD
AM01468v1
Figure 18. Test circuit for inductive load switching and diode recovery times
Figure 17. Test circuit for gate charge behavior
12 V
V
GS pulse width
2200
μF
+
1 kΩ
I
G
= CONST
2.7 kΩ
47 kΩ
47 kΩ
100 nF
100 Ω
V
DD
1 kΩ
D.U.T.
V
G
AM01469v1
Figure 19. Unclamped inductive load test circuit
G
25 Ω
D
A
D.U.T.
S
B
+
_
R
G
A A fast diode
B
B
G
100 µH
D
D.U.T.
3.3
µF
S
+
1000
µF
V
DD
AM01470v1
Figure 20. Unclamped inductive waveform
V (BR)DSS
V D
I
DM
I D
V DD V DD
AM01472v1
V i pulse width
V
D
L
I
D
+
2200
µF
3.3
µF
V
DD
D.U.T.
AM01471v1
0
Figure 21. Switching time waveform t d(on) t on t r t d(off) t off t f
90% 90%
10%
V
GS
V
DS
90%
10%
0 10%
AM01473v1
DS4854 - Rev 4 page 8/24
4
STD7NM80, STD7NM80-1, STF7NM80, STP7NM80
Package information
Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK ® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: www.st.com
. ECOPACK ® is an ST trademark.
DS4854 - Rev 4 page 9/24
4.1
STD7NM80, STD7NM80-1, STF7NM80, STP7NM80
DPAK (TO-252) type A2 package information
DPAK (TO-252) type A2 package information
Figure 22. DPAK (TO-252) type A2 package outline
DS4854 - Rev 4
0068772_type-A2_rev25 page 10/24
DS4854 - Rev 4
Dim.
c2
D
D1
E
E1 e e1
A
A1
A2 b b4 c
L2
L4
R
V2
H
L
L1
STD7NM80, STD7NM80-1, STF7NM80, STP7NM80
DPAK (TO-252) type A2 package information
Table 8. DPAK (TO-252) type A2 mechanical data mm
Typ.
9.35
1.00
2.60
0.65
0.60
4.95
6.40
5.10
2.159
4.445
0.64
5.20
0.45
0.48
6.00
Min.
2.20
0.90
0.03
5.10
5.20
2.286
4.572
2.80
0.80
0.20
0°
10.10
1.50
3.00
0.95
1.00
5.25
6.60
5.30
2.413
4.699
0.90
5.40
0.60
0.60
6.20
Max.
2.40
1.10
0.23
8° page 11/24
DS4854 - Rev 4
STD7NM80, STD7NM80-1, STF7NM80, STP7NM80
DPAK (TO-252) type A2 package information
Figure 23. DPAK (TO-252) recommended footprint (dimensions are in mm)
FP_0068772_25 page 12/24
4.2
STD7NM80, STD7NM80-1, STF7NM80, STP7NM80
DPAK (TO-252) packing information
DPAK (TO-252) packing information
Figure 24. DPAK (TO-252) tape outline
T
Top cover tape
10 pitches cumulative tolerance on tape +/- 0.2 mm
P0 D P2
F
E
W
B1
K0
For machine ref. only including draft and radii concentric around B0
B0
A0 P1
User direction of feed
D1
User direction of feed
R
Bending radius
AM08852v1
DS4854 - Rev 4 page 13/24
DS4854 - Rev 4
Dim.
D1
E
F
K0
P0
A0
B0
B1
D
P1
P2
R
T
W
A
D
B
STD7NM80, STD7NM80-1, STF7NM80, STP7NM80
DPAK (TO-252) packing information
Figure 25. DPAK (TO-252) reel outline
T
40mm min. access hole at slot location
C
N
G measured at hub
Full radius
Tape slot in core for tape start
2.5mm min.width
AM06038v1
2.55
3.9
7.9
1.9
40
0.25
15.7
1.5
1.5
1.65
7.4
Table 9. DPAK (TO-252) tape and reel mechanical data
Tape Reel mm
Dim.
Min.
6.8
10.4
Max.
7
10.6
12.1
1.6
C
D
A
B
G
N
T
Min.
1.5
12.8
20.2
16.4
50 1.85
7.6
2.75
4.1
8.1
2.1
0.35
16.3
Base qty.
Bulk qty.
mm
Max.
330
13.2
18.4
22.4
2500
2500 page 14/24
4.3
STD7NM80, STD7NM80-1, STF7NM80, STP7NM80
IPAK (TO-251) type A package information
IPAK (TO-251) type A package information
Figure 26. IPAK (TO-251) type A package outline
DS4854 - Rev 4
0068771_IK_typeA_rev14 page 15/24
DS4854 - Rev 4
Dim.
D
E e c c2 e1
H
L
L1
L2
V1
A
A1 b b2 b4
B5
STD7NM80, STD7NM80-1, STF7NM80, STP7NM80
IPAK (TO-251) type A package information
Table 10. IPAK (TO-251) type A package mechanical data mm
Typ.
Min.
2.20
0.90
0.64
5.20
0.45
0.48
6.00
6.40
4.40
9.00
0.80
0.30
2.28
16.10
0.80
10°
0.60
0.60
6.20
6.60
4.60
Max.
2.40
1.10
0.90
0.95
5.40
9.40
1.20
1.00
page 16/24
4.4
STD7NM80, STD7NM80-1, STF7NM80, STP7NM80
TO-220FP package information
TO-220FP package information
Figure 27. TO-220FP package outline
DS4854 - Rev 4
7012510_Rev_12_B page 17/24
DS4854 - Rev 4
Dim.
F2
G
G1
H
L2
L3
L4
L5
L6
L7
Dia
D
E
A
B
F
F1
STD7NM80, STD7NM80-1, STF7NM80, STP7NM80
TO-220FP package information
Table 11. TO-220FP package mechanical data mm
Typ.
Min.
4.4
2.5
2.5
0.45
0.75
1.15
1.15
4.95
2.4
10
16
28.6
9.8
2.9
15.9
9
3
Max.
4.6
2.7
2.75
0.7
1
1.70
1.70
5.2
2.7
10.4
30.6
10.6
3.6
16.4
9.3
3.2
page 18/24
4.5
STD7NM80, STD7NM80-1, STF7NM80, STP7NM80
TO-220 type A package information
TO-220 type A package information
Figure 28. TO-220 type A package outline
DS4854 - Rev 4
0015988_typeA_Rev_21 page 19/24
DS4854 - Rev 4
Dim.
E e e1
F
H1
J1
L b1 c
A b
D
D1
L1
L20
L30
øP
Q
STD7NM80, STD7NM80-1, STF7NM80, STP7NM80
TO-220 type A package information
Table 12. TO-220 type A package mechanical data mm
Typ.
Min.
4.40
0.61
1.14
0.48
15.25
1.27
10.00
2.40
4.95
1.23
6.20
2.40
13.00
3.50
16.40
28.90
3.75
2.65
3.85
2.95
10.40
2.70
5.15
1.32
6.60
2.72
14.00
3.93
Max.
4.60
0.88
1.55
0.70
15.75
page 20/24
5
STD7NM80, STD7NM80-1, STF7NM80, STP7NM80
Ordering information
Ordering information
Order code
STD7NM80
STD7NM80-1
STF7NM80
STP7NM80
Table 13. Order codes
Marking
D7NM80
D7NM80
F7NM80
P7NM80
Package
DPAK
IPAK
TO-220FP
TO-220
Packing
Tape and reel
Tube
DS4854 - Rev 4 page 21/24
STD7NM80, STD7NM80-1, STF7NM80, STP7NM80
Revision history
Date
22-Sep-2006
09-Oct-2007
02-Oct-2009
20-Aug-2018 4
Table 14. Document revision history
Version
1
2
3
Changes
First release.
Added new section: Electrical characteristics (curves) .
Corrected marking and description on first page.
Updated Section 4 Package information
.
Minor text changes.
DS4854 - Rev 4 page 22/24
STD7NM80, STD7NM80-1, STF7NM80, STP7NM80
Contents
Contents
1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2 Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
2.1
Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
4 Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
4.1
DPAK (TO-252) type A2 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.2
DPAK (TO-252) packing information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.3
IPAK (TO-251) type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.4
TO-220FP package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4.5
TO-220 type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
DS4854 - Rev 4 page 23/24
STD7NM80, STD7NM80-1, STF7NM80, STP7NM80
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2018 STMicroelectronics – All rights reserved
DS4854 - Rev 4 page 24/24
