WL25
BASIC SA FET Y INSTRUC TIONS 29
2.4.7
Tip-overs
WARNING
Personal injury hazard.
Falling Loader can strike or crush the operator.
►
Do not operate the wheel loader without fastening the seat belt.
►
Keep the loader lift arms and attachment as low as practical when traveling.
If the machine tips over, or in the event of an extreme slope condition, take the following steps to avoid engine damage:
►
Stop the engine as quickly as practical to avoid damage from lubrication starvation.
►
Do not operate the engine or machine after an incident until a technician has inspected and corrected any damage resulting from the incident.
2.4.8 Noise
• All the loader‘s sound-proofing devices must be in their protection position during operation.
•
If necessary, the operator must wear personal hearing protection.
2.4.9 Oils, grease and other chemical substances
•
Observe the valid safety regulations for the respective product when handling oil, grease and other chemical substances.
•
Do not service the wheel loader immediately after operation. Wait until hot surfaces have cooled and can be touched comfortably.
• Smoking and open flames are prohibited during fueling.
Danger of fire or explosion!
NOTICE
Use the appropriate fuel for climate temperature ranges to avoid engine stoppage from fuel gelling.
30 BASIC SA FET Y INSTRUC TIONS
2.5
Transporting and towing / restarting
•
Instructions are provided in this Operator’s Manual for towing, loading and transporting the wheel loader safely without machine damage.
•
The towing machine shall be capable of towing the wheel loader.
•
The loading and transport equipment shall be appropriate to safely complete the sequence of operation. If the wheel loader is to be lifted by a crane device, consult the machine specifications to select the correct crane capacity and OSHA lifting devices to safely complete the lifting operation.
•
Only restart the loader according to the Operator’s
Manual.
•
See Chapter 6 for complete transporting and towing instructions.
2.6
Final decommissioning / dismantling
• Drain and dispose of all fluids in suitable containers and dispose of the fluids in an environmentally responsible manner. Do not dispose in sewers, streams, lakes or on the ground.
•
Remove the battery and dispose of it at an authorized recycling center. Remove the starting motor to disable the engine.
•
Dismantle and recycle the components according to the material instructions on the individual parts. Tires and rubber based parts can be recycled separately.
