W L 25
Ope r ating a nd Ope r atiOn 77
Ventilation outlets
5.2.5 Before starting the engine
Fig. 29
Ventilation outlets
Before starting the engine:
•
Make sure that no one is on or near the loader.
•
Keep the operating elements clean and dry.
•
Remove or tighten all loose objects in the cab.
•
Make sure that the cab windows and exterior mirrors are clean.
•
While in the operator’s seat, position the exterior mirrors so that you have a good view of the area immediately behind the loader.
• Make sure that all safety devices are fitted, all tools have been removed after repairs, and the hood is closed.
You can use the outlets (Fig. 29) to control air flow into cab.
In cold weather, warm air supply keeps the windows free of ice and heats the cab in the process.
1. Perform the »Before entering the cab« checks prior to starting the engine (see the chapter »Operation«).
2. Adjust the operator’s seat and the steering column as needed.
3.
Adjust the rear view mirror / exterior mirror.
4. Put on your seat
belt.
