W L 25
TECHNICAL DATA 43
Electrical system
The electrical system operates at 12 volts and the electrical circuits are protected by fuses to prevent overload damage to the system and its components.
Equipment
The loading equipment consists of the loader lift arms with an integrated mechanical or hydraulic quick-change receptacle, lifting and tipping cylinders and the appropriate attachments.
3.2 Loader data
Engine
4-cylinder Perkins diesel engine
Output
24,6 kW / 34 hp at 2800 rpm
SAE rating according to ISO9249
Type 404 D – 15 water-cooled
Capacity 1508 cm³ (92 inch³)
The loader is equipped with a rollover protective structure
(ROPS).
Steering
Fully hydraulic center-pivot steering
Rotating angle
Turn angle
12°
45°
Electrical system
Working voltage
Battery
Drive (driving speed)
1. gear
0 – 7 km/h
2. gear
0 – 20 km/h
12 volts
77 Ah
0 – 4.35 mph
0 – 12.43 mph
44 TECHNICAL DATA
Hydraulics
Driving hydraulics
Flow rate
78 l/min
Working pressure 450 bar
Working hydraulics
Flow rate
45 l/min
Working pressure 185 bar
Steering hydraulics
Flow rate
45 l/min
Working pressure 175 bar
Weight specifications
Operating weight
Permissible total weight
Permissible axle load per axle
Permissible payload with shovel
Permissible payload with pallet fork
20.61 gallons/min
6527 psi
11.89 gallons/min
2683 psi
11.89 gallons/min
2538 psi
2520 kg 5556 lb
3000 kg 6614 lb
1600 kg 3527 lb
670 kg 1477 lb
613 kg 1351 lb
Vibrations (weighted effective value)
Upper extremities no more than
2.50 m/s² 8.19 ft/s²
Feet or seat surface no more than
0.80 m/s² 2.64 ft/s²
Noise values
Average LwA measured at the operator‘s ear 108,8 dB(A)
Guaranteed LwA measured at the operator‘s ear
101 dB(A)
Specified LpA measured at the operator‘s ear
82 dB(A)
W L 25
TECHNICAL DATA 45
3.3
Product identification number plates
A product identification number plate is attached to the
loader on the right side of the front carriage (Fig. 10).
Fig. 10
Vehicle ID
It lists the following information:
8
9
10
11
12
Item Designation
1 Manufacturer
2
3
4
5
6
7
Vehicle description
Article number
Vehicle ID no.
Type
Engine power KW
Permissible front axle load kg
Operating weight kg
Permissible rear axle load kg
Permissible total weight kg
Permissible trailer load kg
Homologation number
1
Radlader
Art.-Nr.
2
3
Fahrzeug-Ident-Nr.
Typ
Motorleistung kW
Betriebsgewicht kg zul. Ges Gew. kg
Hom.-Nr
6
8
4
5
10
12
Furthermore, the following loader components each have their own rating plate:
Weidemann GmbH
1
D-34519 Diemelsee-Flechtdorf zul. Achslast vorn kg zul. Achslast hinten kg zul. Anhängelast kg
7
9
11
In addition, the vehicle ID is engraved on the right side of
the rear end near the entry area (Fig. 10/1).
•
The diesel engine
•
The axial piston variable displacement pump (hydraulic transmission pump)
•
The oil engines (hydraulic traction motor)
•
The axles.
