160 SE RVICING A ND INSPEC TION
10.5 General safety check
Immediately rectify any damage detected during the safety check. Damaged parts must be immediately repaired or replaced. Do not use the loader again until the damage has been rectified professionally.
Check:
• all steel parts for damaged and loose screws/bolts, par
ticularly the ROPS structure,
• the condition of the seat belt,
• the quick-change system for the attachments,
• that all the hinge pins are in the correct position and are secured by their locking devices,
• that the step and handles are in good condition, clean and fit well,
• cab windows for cracks and fractures,
• the condition of the reflectors and the lighting, including the work lights,
• the tires for damage and any sharp-edged objects that have penetrated them,
• the condition of all warning and message labels.
W L 25
10.6
Specifications and filling quantities
SE RVICING A ND INSPEC TION
When filling oil, the oil level must correspond to the dip stick or control screw markings.
Item Capacity in liters / gallons Fluid / grease nipple
Fuel reservoir 45 11.89
Diesel fuel
Engine oil with filter
Cooling system contents
Front axle
Rear axle
Complete hydraulic system
Hydraulic reservoir
Points of lubrication
Brake system
4,5
7,5
2,5
3,5
36
27
0,7
1.19
1.98
Engine oil SAE 10 W 40 Ambient temperature -20°C to +40°C (-4°F to +104°F)
Water with conventional HD coolant / antifreeze
0.66
0.92
Transmission oil SAE 90 GL 5
9.51
Hydraulic fluid HLP
7.13
Hydraulic fluid HLP
Multi-purpose grease
0.18
ATF oil
Specification
#1 or #2, see engine manual
API CG-4 / API CH-4
See engine manual
HD coolant / antifreeze: ASTN
D4985
ISO VG 46
ISO VG 46 water-resistant
161
