92 Ope r ating a nd Ope r atiOn
5.4.3 Loader lift arms locking system
•
Before traveling from worksite to worksite over extended distances, engage the loader lift arm lock after selecting the height for the travel arms for the travel segment.
•
Do not release the loader lift arm lock until starting the work cycle, or after parking the loader and prior to lowering the lift arms to the ground with the attachment.
Fig. 36
Lever for the locking mechanism of the
Loader lift arms
The loader lift arm can be secured against unintentional operation by means of a locking mechanism.
If you have switched on the locking mechanism, the loader lift arms will not move if the loader controls are moved. The fact that the loader lift arm is locked is not shown via indicator lights, but instead can be seen from the position of the switching lever
(Fig. 36).
1
Apply the locking system for the loader lift arm by shifting the lever located to the right of the operator’s seat Item 1
(Fig. 36).
•
Push the switching control rearward toward the seat frame:
– the locking system is now on.
•
Pull the switching control forward away from the seat frame:
– the locking system is now off.
