- Computers & electronics
- Print & Scan
- Scanner Transparancy Adapters
- Microtek
- ArtixScan 120tf
- Installation and Operation Manual
Environmental Requirements. Microtek ArtixScan 120tf
Add to My manuals24 Pages
Microtek ArtixScan 120tf is a high-resolution scanner designed for scanning transparent media such as film, slides, and filmstrips. With a 42-bit color depth and a single-pass scanning mechanism, it delivers fast and accurate scans. The ArtixScan 120tf features dual interfaces (FireWire and SCSI) for flexible connectivity options. It also includes powerful software, including ScanWizard Pro TX, for image editing and color calibration.
advertisement
![Environmental Requirements. Microtek ArtixScan 120tf | Manualzz Environmental Requirements. Microtek ArtixScan 120tf | Manualzz](http://s1.manualzz.com/store/data/000755066_1-1d0729f991322c895a6715b918906a54-360x466.png)
Environmental Requirements
Before unpacking your scanner, make sure that the location where the scanner will be installed is large enough for easy operation.
• Make sure that the operating environment for the scanner is free of dust and other contaminants.
• Allow adequate ventilation space (no less than 39.8" or 91.6 cm) around the scanner.
• Place the scanner on a flat, stable surface that is not subject to vibration.
• Make sure that the scanning surface will not be exposed to direct sunlight or other sources of bright light.
• Avoid placing the scanner close to sources of extreme cold or heat.
• Avoid connecting the scanner to a power source that might experience power surges.
• Avoid positioning the scanner in the path of heavy traffic where it may get bumped.
• Place the scanner within 3 feet of the computer. Use the FireWire cable or the SCSI cable that came with your scanner.
Once the scanner has been placed in a suitable location and is ready to be connected to the host computer, it is time to proceed with installation of the necessary hardware and software components for the scanner.
2 ArtixScan 120tf Installation and Operation Manual
Unpacking the Scanner
While unpacking the scanner, inspect the shipping carton for any signs of mishandling or damage. Your scanner’s packing carton and padding material have been carefully chosen to prevent damage to the unit in shipping and can withstand a reasonable amount of pressure.
Refer to the enclosed packing list to ensure that you received all of the parts necessary for scanner setup. If there are any damaged or missing parts, contact
Microtek's customer service department.
1
3-1
4
3
2
1
3-2
6
5
4
3
2
1 2-1
FireWire
2-4
2-5
3-3
2-2
2-6
3-4
2-3
1. ArtixScan 120tf scanner
2-1. FireWire card
2-2. FireWire cable
2-3. SCSI cable
2-4. Power cord
2-5. Microtek CD-ROM (ScanWizard Pro TX)
2-6. Documentation: Includes ArtixScan 120tf
Installation and Operation Manual, ScanWizard Pro TX
User’s Guide, ScanWizard Pro TX Quick Reference, and other inserts.
3-1. 35mm Slide Holder
3-2. 35mm Film Holder
3-3. 6 x 9 cm Filmstrip Holder
3-4. Dust cover
ArtixScan 120tf Installation and Operation Manual 3
advertisement
Related manuals
advertisement
Table of contents
- 5 System Requirements
- 6 Environmental Requirements
- 8 Taking a Closer Look
- 9 Installing the Scanner Software
- 10 Connecting the Scanner to Your Computer
- 10 Using the FireWire Cable
- 12 Using the SCSI Cable
- 14 A. Positioning the Transparent Film
- 14 Using the 35mm Slide Holder
- 15 Using the 35mm Filmstrip Holder
- 16 Using the 6 x 9 cm Filmstrip Holder
- 17 B. Inserting the Film Holder
- 17 C. Ejecting the Film Holder
- 20 Installing MSP
- 20 The Color Calibration Target
- 21 Positioning Your Target
- 22 Calibrating Your Target
- 23 Loading a Profile