- Computers & electronics
- Print & Scan
- Scanner Transparancy Adapters
- Microtek
- ArtixScan 120tf
- Installation and Operation Manual
Positioning Your Target. Microtek ArtixScan 120tf
Add to My manuals24 Pages
Microtek ArtixScan 120tf is a high-resolution scanner designed for scanning transparent media such as film, slides, and filmstrips. With a 42-bit color depth and a single-pass scanning mechanism, it delivers fast and accurate scans. The ArtixScan 120tf features dual interfaces (FireWire and SCSI) for flexible connectivity options. It also includes powerful software, including ScanWizard Pro TX, for image editing and color calibration.
advertisement
![Positioning Your Target. Microtek ArtixScan 120tf | Manualzz Positioning Your Target. Microtek ArtixScan 120tf | Manualzz](http://s1.manualzz.com/store/data/000755066_1-1d0729f991322c895a6715b918906a54-360x466.png)
Positioning Your Target
Place the Kodak Q-60E 35mm target face up (as shown in the illustration below). Place the target on the first frame of the 35mm slide holder, then insert the holder into the scanner.
Proper positioning of the target on the scanner is important for a successful calibration.
Make sure the Kodak© logo appears here.
Kodak
K
DA
O
OME
Q-60E3 K
ACHR
EKT essional Film
Prof
35.8
2001:03
IT8.7/1-1993
ArtixScan 120tf Installation and Operation Manual 17
advertisement
Related manuals
advertisement
Table of contents
- 5 System Requirements
- 6 Environmental Requirements
- 8 Taking a Closer Look
- 9 Installing the Scanner Software
- 10 Connecting the Scanner to Your Computer
- 10 Using the FireWire Cable
- 12 Using the SCSI Cable
- 14 A. Positioning the Transparent Film
- 14 Using the 35mm Slide Holder
- 15 Using the 35mm Filmstrip Holder
- 16 Using the 6 x 9 cm Filmstrip Holder
- 17 B. Inserting the Film Holder
- 17 C. Ejecting the Film Holder
- 20 Installing MSP
- 20 The Color Calibration Target
- 21 Positioning Your Target
- 22 Calibrating Your Target
- 23 Loading a Profile