2.4 Connect to IP Camera. Air Live SD-2020

2. Package Contents and Installation

3. Connect the external power supply to Camera (Optional)

Connect the power adapter to the AC power jack of the camera.

Once you have installed the camera well and powered it on, the power LED (orange) will turn on later. When the power LED turned on, it means that the system is booting up successfully. Furthermore, if you have a proper network connection and access to the camera, the LAN LED (green) will flash.

Note: Use the 24VAC power adapter, which is Not included in the package, and connect it to wall outlet for AC power.

2.4 Connect to IP Camera

1. Insert the bundle CD into your PC/Laptop.

2. Auto Run Screen then shows up; click “Install Software Æ “IPWizard II” to install the configuration tool software.

11 AirLive SD-2020 User’s Manual

2. Package Contents and Installation

AirLive SD-2020 User’s Manual 12

2. Package Contents and Installation

3. After completing installation, run the configuration tool software.

4. The Software scans the network and finds the IP Camera and then lists them in the dialog box.

13 AirLive SD-2020 User’s Manual

2. Package Contents and Installation

5. If the Camera’s IP address is in the same IP segment as your LAN, select the founded IP

Camera and double click on the item. Then, the default browser will show up and connect to the IP camera’s Web automatically.

AirLive SD-2020 User’s Manual 14