8. PTZ

8 8.

PTZ

Click the PTZ to display the sub-menus including Preset, Cruise, Sequence, Home, Tilt

Range, Camera- Exposure, Camera- WB, Camera- Misc1, Camera- Misc2, and

Camera- Default.

8.1 Preset

Totally 256 Preset Points can be programmed for the IP Camera. Please refer to the instructions below to set a Preset Point.

- Preset Setting

To setup a Preset Point, please first move the cursor to the live view pane. Then left click and drag the red pointer with PTZ controls to a desired position and adjust the fine zoom / focus ratio. Subsequently, assign a number for the current position from the drop-down Number List (click on <PrePage> or <NextPage> button to reach number 1 to 256), and enter its descriptive name. Click on the button <Set> to save the settings mentioned above.

73 AirLive SD-2020 User’s Manual