Use of generic consumables
The printer is designed to offer the best performance with using specified ink and ink cartridges.
Though re-filled or generic ink cartridges can be used, SIIT highly recommends you to use SIIT standard inks only in the printer.
Generic inks have the potential to cause damage to the printer, leading to interference in normal operation, and SIIT reserves the right to void the warranty if any issue is deemed by SIIT to be caused in part by the use of non-SIIT inks.
When generic consumables are used:
- Generic consumables have the potential to cause damage to the printer, leading to interference in normal operation, and SIIT reserves the right to void the warranty if any issue is deemed by SIIT to be caused in part by the use of non-SIIT inks. SIIT highly recommends you to use SIIT standard inks only in the printer.
- When using an re-filled or generic ink cartridge for any single color, specified ink cartridges used for other colors are also regarded as unspecified.
- The printed image quality may be lower than that achieved by using specified consumables.
- The printer cannot correctly recognize the remaining ink quantity. In this case, the quantity is displayed as “???%”.
To use a re-filled ink cartridge
Before conducting the following operations, read [When generic consumables are used] carefully.
To replace the ink cartridge, refer to P.2-46 [Ink cartridge replacement].
1
The printer recognizes an empty ink cartridge and displays the message.
2
Press the changes.
key and the
REPLACE
XX INK CARTRIDGE
XX : Ink name
K : Black
M : Magenta
C : Cyan
Y : Yellow
Lm: Light magenta Lc : Light cyan
key at the same time until the message
6
6-3
6-4
3
The guidance message is displayed.
4 Refer to the procedures described in the next items.
SEE CHAPTER 6
IN USER'S GUIDE
To use an generic ink cartridge
Before conducting the following operations, read P.6-3 [When generic consumables are used] carefully.
To replace the ink cartridge, refer to P.2-46 [Ink cartridge replacement].
1
The guidance message is displayed.
SEE CHAPTER 6
IN USER'S GUIDE
2
Press continue.
to cancel. Press to
ACCEPT:OK
REJEC T:CANCEL
3 Choose whether to agree to the printer warranty.
Press
Press to cancel.
to continue.
SEE WARRANT Y
CONDITIONS CONT?
4 Choose whether to agree to the safety issues.
Press
Press to cancel.
to continue.
SEE SAFET Y
CONDITIONS CONT?
5
The guidance message for final confirmation is displayed.
CONFIRM NON-SII [ ]
REPLACE [ ]
Choose the item using keys, and press the display changes.
and
key and the key at the same time until the
When [CONFIRM NON-SII] is chosen, the printer warranty and safety issues described above are deemed to be approved, and the use of generic ink cartridges becomes available.
When [REPLACE] is chosen, the display shows the message for normal ink cartridge replacement.
6
6-5
6-6 q Use of generic consumables
Cleaning liquid
Generic cleaning liquid can be used, but requires some operations in the same way as using generic ink.
However, generic cleaning liquid have the potential to cause damage to the printer, leading to interference in normal operation, and SIIT reserves the right to void the warranty if any issue is deemed by SIIT to be caused in part by the use of non-SIIT cleaning liquid. SIIT highly recommends you to use SIIT standard cleaning liquid only in the printer.
Appendix
This section contains basic specifications, options and consumables for the printer.
(Content in this section)
Basic Specification .............................................................A-2
Options / Consumables ...................................................A-3