Basic operation. Lenco Portable TFT TV DVT-1922, DVT-1922

8.Teletext operation

TXT/MIX: press TXT/MIX to enter teletext state and display teletext page if want to display image and teletext page at the same time. Press this button again. If want to exit teletext state. Press this button again. If want to exit telext state. Press this button again. when teletext page is displayed on the screen. You can select relevant function by using the remote control.

SUBPAGE: is refer to the subpage of teletext page, i.e subcode page. When it is pressed. The screen display the requirement of subpage code entry. If there is on subpage, it will not be displayed. In most case, there is no subpage.

HOLD: press it once to keep the display of the page and press is again to exit hold state.

CANCEL: do not display the content of the page. But only the channel image. Press

it again to display the content of the page again. Or button on the remote control can be used to display the content of previous or next page. Number buttons on the remote control can be used to get to a certain page. Press the red green yellow cyan button on the remote control, the page of relevant color displayed on the lower part of the screen will be displayed.

SIZE: press it once to enlarge the content on the upper part of the page, and press it the second time to enlarge the content on the lower part of the page, and the third time to resume normal display of all the contents on the page.

REVEAL: press it once to display the concealed text. Press it again to close the display of concealed text.

INDEX: press it once to display the index for all the teletext page.

FAST TEXT (For possible future reference): The RED,GREEN,YELLOW and CYAN buttons are used for quick access to color coded pages transmitted by FAST TEXT broadcast.

Example: RED select CITY INFORMATION, CYAN select TRAVEL INFORMATION,

GREEN select WEATHER INFORMATION, YELLOW select TV

PROGRAMING.

11