advertisement
▼
Scroll to page 2
of
61
ioLogik E1500 Series Using ioSearch
Introduction to ioSearch
ioSearch is for locating or searching for an ioLogik E1500 on the physical network. The following functions are supported by the ioSearch utility.
• Search for and locate ioLogik E1500 units.
• IP address configuration.
• Firmware upgrades for multiple ioLogik E1500 units (same model).
• Export configuration files from multiple ioLogik E1500 units.
• Import a configuration file to multiple ioLogik E1500 units (same model).
• Reset to default for multiple ioLogik E1500 units.
ioSearch Main Screen
Main Screen Overview
The main screen displays the result of the broadcast search of the ioLogik E1500.
1
2
4
5
3
ioSearch Main Screen
1. Title
2. Menu bar
3. Quick link
4. Navigation panel
5. Main window
4-2
advertisement
Related manuals
advertisement
Table of contents
- 6 Overview
- 6 Getting Started
- 6 Basic Configuration
- 6 Software Configuration
- 7 Common Specifications
- 8 ioLogik E1510-T
- 8 ioLogik E1512-T
- 10 Panel Guide
- 10 LED Indicators
- 11 Isolation DI (DI channels)
- 11 DI Circuit (DIO channels)
- 11 DO Circuit (DIO channels)
- 13 Connecting the Power
- 13 Grounding the ioLogik E1500
- 13 Connecting to the Network
- 14 I/O Wiring Diagrams
- 14 DI dry contact mode
- 14 DI wet contact mode (Ch-Ch isolation)
- 15 DI wet contact PNP/NPN mode (No CH-CH isolation)
- 15 DIO_DI wet contact mode (no CH-CH isolation)
- 16 DIO_DO sink mode
- 19 General Settings
- 20 Ethernet Configuration
- 21 Default Address
- 23 DI Channels
- 25 DO Channels
- 27 IP Accessibility
- 27 To allow access to a specific IP address
- 27 To allow access to hosts on a specific subnet
- 27 To allow unrestricted access
- 28 Network Connection
- 28 Firmware Update
- 28 Import System Configuration Settings
- 29 Export System Configuration Settings
- 29 Change Password
- 32 Main Screen Overview
- 33 System
- 34 Sort
- 34 Quick Links
- 35 Locate
- 35 Firmware Upgrade
- 35 Batch Upgrades on Multiple Devices of the Same Model
- 35 Unlock
- 36 Import
- 36 Export
- 37 Change IP Address
- 37 Batch TCP/IP Configuration of Multiple Devices
- 38 Restart System
- 38 Reset to Default
- 39 Mass Deployment (Import)
- 39 Mass Deployment (export)
- 41 Active OPC Server System Requirements
- 41 OLE for Process Control
- 42 Active OPC Server—From Pull to Push
- 44 One Simple Click Creates Active Tags
- 44 Faster, More Accurate Data Collection than Traditional “Pull Technology”
- 45 Installing Active OPC Server
- 45 Main Screen Overview
- 45 Menu Bar
- 45 File
- 46 System
- 47 Sort
- 47 Quick Links
- 49 Fixed & Dynamic Default addresses
- 49 0xxxx Read/Write Coils (Support function 1,5,15)
- 50 1xxxx Read only Coils (Support function 2)
- 51 3xxxx Read only Registers (Support function 4)
- 53 Fixed & Dynamic Default addresses
- 53 0xxxx Read/Write Coils (Support function 1,5,15)
- 54 1xxxx Read only Coils (Support function 2)
- 55 3xxxx Read only Registers (Support function 4)
- 55 4xxxx Read/Write Registers (Support function 3,6,16)