Safety notes. Batavia 7056831

English

Safety notes

The roof cleansing tape is an effective means to protection your roof against moss and fungus. This manual belongs to the product. It contains important notes on handling the roof cleansing tape.

Please read the safety instruc-

tions! These instructions will make it easier for you to handle the device appropriately and help prevent misunderstandings and possible damage or injury.

Please note the following safety notes to avoid malfunctions, damage or physical injury:

• The roof cleansing tape has sharp edges. Please always wear safety gloves during this work and take pre cautions against falling off the roof.

• Do not process the moos stop at temperatures below 15°C and if temperatures exceed 35°C.

• Please use a second roof cleansing tape band on roofs with a depth larger than 7 meters.

• For roofs made of reed, wood shingle, cement asbestos or other material a guarantee for a proper functionality can not be provided.

Mounting

1. Before you process the copper roll, clean the roof tiles. Remove dust, moss and other impurities with a high pressure cleaner on a

25 cm wide stripe below the ridge.

2. Make sure that the surface is clean, dry and glue-able. The surface material must not offer a roll-off effect (Lotus or Nano

Effect).

3. A protective coating is required for rain pipes made of zinc before the roof cleansing tape tape can be processed.

4. In any case it is important to perform a glue-test before fixing the roof cleansing tape tape for the first time. Remove a small part of the protection film at the backside of the copper spool and attach it to the cleaned roof tiles.

When you pull it off again you should see threads. In this case the surface is suitable for the roof cleansing tape.

6

7056831 Ma # 1411-12.indb 6 13-11-14 17:05