Disposal. Batavia 7056831

English

5. After a successful glue-test remove a part of the protection film at the backside of the copper spool and push it 1 – 2 cm under the ridge tile.

6. Place the copper roll on top of the roof tiles and firmly press down the roll piece by piece in order to affix it. It is important that the adhesive layer sits firmly on all parts of the surface. It is recommened to use a seam roller to firmly affix the glue to the tiles.

After some time the roof cleansing tape will prevent the growing of new moss on the roof. And previously existing moss can be washed out. The effective period of the roof cleansing tape depends mostly on the affection and on the amount of rain. We suggest to clean the rain pipe from time to time to avoid blockages caused by the separated moss. You also could use an appropriate cover for your rain pipe.

Remove adhesive strip

Lay down + position

Press down using a seam roller

Disposal

Dear Customer, please help avoid waste materials. If you at some point intend to dispose of this article, then please keep in mind that many of its components consist of valuable materials, which can be recycled. Please do not discharge it in the rubbish bin, but check with your local council for recycling facilities in your area.

7056831 Ma # 1411-12.indb 7

7

13-11-14 17:05