Installing the Printer Driver and Software. Brother TD-2120N, TD-2130N, TD-2020

4

Chapter 1

Installing the Printer

Driver and Software

The printer driver and software can be installed using any of the following three methods:



USB cable connection (page 5)

 Wired LAN connection

(TD-2120N/2130N only) (page 7)

 Wireless LAN connection

(TD-2120N/2130N only) (if the WLAN interface is attached)

In order to use a wireless LAN connection, the WLAN interface (optional) must be attached to the printer. For details on attaching the WLAN interface (optional), see its instruction manual.

For details on making a wireless LAN

connection, see Using the WLAN Interface

(Optional:PA-WI-001) (TD-2120N/2130N

only) on page 93.

Windows ® 7 is used in the following procedures. The installation procedure may differ depending on the operating system being used. If an operating system other than

Windows

®

7 is being used, read the procedures with the screens replaced with the corresponding screens for your operating system. In addition, the installation procedure is subject to change without notice.

1

If you are using Windows ® 8, make sure the default program to open PDF files is Adobe

®

Reader

®

before using the CD-ROM.

Otherwise PDF files may not open and links within PDF files may not work correctly. In addition, make sure the default web browser is Internet Explorer

®

before using the

CD-ROM. Otherwise links to websites may not work.

Before starting the installation, make sure that you are logged on with administrator rights.