Indicators. Brother TD-2120N, TD-2130N, TD-2020

6

Indicators

6

Indicators

The indicators light and blink to indicate the printer’s status. The following symbols are used in this section to show the different indicator colors and patterns.

For details on error causes and solutions, see Troubleshooting on page 55.

6

or

or or

or

or

Indicator is lit in the color shown

Indicator is blinking in the color shown

Indicator blinks 1 or 3 times in the color shown, then turns off

Indicator is lit or blinking in any color or pattern

Indicator is off

6

POWER

(3 times)

(1 time)

STATUS Description

Printer turned on

Initializing

RD Roll compartment top cover open

Receiving data

Transferring/importing data

Now cooling

Resetting the incrementing field

(3 times)

Initializing complete

(1 time)

(Once every 1.8 seconds)

Error 1

See Troubleshooting on page 55.

(Twice every 1.8 seconds)

Error 2

See Troubleshooting on page 55.

System error

In boot mode

53

Chapter 6

POWER

(3 times)

STATUS

(3 times)

(1 time)

(Once every 3 seconds)

Description

Now resetting

In mass storage mode

Processing file in mass storage mode

 Wireless LAN on and connected*

(when using the optional WLAN interface)

 Bluetooth on*

(when using the optional Bluetooth interface)

 USB host port connected to a supported device

Wireless LAN on but not connected*

(when using the optional WLAN interface)

Now setting WPS*

(when using the optional WLAN interface)

Bluetooth switched*

(when using the optional Bluetooth interface)

* TD-2120N/2130N only

(3 times)

54