Cisco IOS XR System Monitoring Command Reference for the Cisco

Alarm Management and Logging Correlation Commands show logging events info

show logging events info

To display configuration and operational information about the logging events buffer, use the show logging

events info command in EXEC modeXR EXEC mode.

show logging events info

Syntax Description This command has no keywords or arguments.

Command Default None

Command Modes EXEC modeXR EXEC mode

Command History

Release

Release 2.0

Release 3.2

Release 3.7.2

Release 5.0.0

Modification

This command was introduced.

This command was introduced.

This command was introduced.

This command was introduced.

Usage Guidelines This command displays information about the size of the logging events buffer, the maximum size of the buffer, the number of records being stored, the maximum allowable number of records threshold for circular filing, and message filtering.

Task ID

Task ID logging

Operations read

Examples This is the sample output from the show logging events info command:

RP/0/0RP0RSP0/CPU0:router:hostname# show logging events info

Size (Current/Max)

16960 /42400

#Records

37

Thresh

90

Filter

Not Set

This table describes the significant fields shown in the display.

Cisco IOS XR System Monitoring Command Reference for the Cisco CRS Router, Release 4.2.x

67 OL-26517-02

Alarm Management and Logging Correlation Commands show logging events info

Table 7: show logging events info Field Descriptions

Field

Size (Current/Max)

#Records

Thresh

Filter

Description

The current and maximum size of the logging events buffer. The maximum size of the buffer is controlled by the

logging events buffer-size, on page 30

command.

The number of event records stored in the logging events buffer.

The configured logging events threshold value. This field is controlled by the

logging events threshold,

on page 37 command.

The lowest severity level for events that will be displayed. This field is controlled by the

logging events level, on page 35

command.

Related Commands

Command

logging events buffer-size, on page 30

logging events level, on page 35

logging events threshold, on page 37

show logging events buffer, on page 62

Description

Specifies the logging correlator buffer size.

Specifies a severity level for logging alarm messages.

Specifies the logging events buffer capacity threshold that, when surpassed, will generate an alarm.

Displays information about messages in the logging events buffer according to type, time, or severity level.

68

Cisco IOS XR System Monitoring Command Reference for the Cisco CRS Router, Release 4.2.x

OL-26517-02