advertisement
IP Service Level Agreement Commands show ipsla responder statistics
show ipsla responder statistics
To display the number of probes that are received or handled by the currently active ports on the responder, use the show ipsla responder statistics ports command in EXEC modeXR EXEC mode.
show ipsla responder statistics {all| permanent} ports
Syntax Description all permanent
Port statistics is displayed for all ports.
Port statistics is displayed only for permanent ports.
Command Default None
Command Modes EXEC modeXR EXEC mode
Command History
Release
Release 3.3.0
Release 3.3.0
Release 3.7.2
Release 5.2.3
Modification
This command was introduced.
This command was introduced.
This command was introduced.
This command was introduced.
Usage Guidelines The output of the show ipsla responder statistics port command is available only for specific intervals of time in which only nonpermanent ports are being used at the responder. The reason is that the responder closes the nonpermanent ports after each operation cycle. However, if both permanent and nonpermanent ports are used, the output always contains rows for the permanent ports. The rows for the nonpermanent ports are displayed only if those nonpermanent ports are enabled at the instant the command is issued.
Task ID
Task ID monitor
Operations read
Examples The following sample output is from the show ipsla responder statistics port command:
256
Cisco IOS XR System Monitoring Command Reference for the Cisco CRS Router, Release 4.2.x
OL-26517-02
IP Service Level Agreement Commands show ipsla responder statistics
RP/0/0RP0RSP0/CPU0:router:hostname# show ipsla responder statistics all port
Port Statistics
---------------
Local Address Port Port Type Probes Drops CtrlProbes Discard
172.16.5.1
3001 Permanent 0 0 0
172.16.5.1
172.16.5.5
172.16.5.1
10001 Permanent
8201 Dynamic
4441 Dynamic
728160
12132
207216
0
0
0
24272
12135
3641
ON
ON
This table describes the significant fields shown in the display.
Table 22: show ipsla responder statistics port Field Descriptions
Field
Local Address
Port
Port Type
Probes
Drops
CtrlProbes
Discard
Description
Local IP address of the responder device used to respond to IPSLA probes.
UDP socket local to the responder device used to respond to IPSLA probes.
It could be "permanent" or "dynamic"; depends upon whether a permanent port configuration is done.
Number of probe packets the responder has received.
Number of probes dropped.
Number of control packets the responder has received.
If the state is ON, the responder will not respond to probes.
OL-26517-02
Cisco IOS XR System Monitoring Command Reference for the Cisco CRS Router, Release 4.2.x
257
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project