Cisco IOS XR System Monitoring Command Reference for the Cisco

IP Service Level Agreement Commands server twamp

server twamp

To configure the TWAMP server, use the server twamp command in the appropriate mode. To remove the set configuration, use the no form of the command.

server twamp [ port number | timer inactivity value ]

noserver twamp [ port number | timer inactivity value ]

Syntax Description port number timer

inactivity value

Configures the port for the server.

Port number. Range is 1 to 65535.

Configures the timer for the server.

Inactivity timer value in seconds. Range is 1 to 6000.

Command Default Default port is 862.

Default timer value is 900 seconds.

Command Modes IPSLA configuration mode

Command History

Release

Release 5.1.1

Modification

This command was introduced.

Usage Guidelines No specific guidelines impact the use of this command.

Task ID

Task ID monitor

Operation read, write

Examples This example shows how to use the server twamp command:

RP/0/0RP0RSP0/CPU0:router:hostname (config-ipsla) # server twamp timer inactivity 100

240

Cisco IOS XR System Monitoring Command Reference for the Cisco CRS Router, Release 4.2.x

OL-26517-02