Cisco IOS XR System Monitoring Command Reference for the Cisco

IP Service Level Agreement Commands reaction operation

reaction operation

To configure certain actions that are based on events under the control of the IP SLA agent, use the reaction

operation command in IP SLA configuration mode.To remove the reaction so that no reaction occurs, use the no form of this command.

reaction operation operation-id

no reaction operation operation-id

Syntax Description operation-id Number of the IP SLA operation for the reactions to be configured. Range is 1 to 2048.

Command Default No reaction is configured.

Command Modes IP SLA configuration

Command History

Release

Release 3.3.0

Release 3.3.0

Release 3.7.2

Release 5.2.3

Modification

This command was introduced.

This command was introduced.

This command was introduced.

This command was introduced.

Usage Guidelines No specific guidelines impact the use of this command.

Task ID

Task ID monitor

Operations read, write

Examples The following example shows how to use the reaction operation command:

RP/0/0RP0RSP0/CPU0:router:hostname# configure

RP/0/0RP0RSP0/CPU0:router:hostname(config)# ipsla

RP/0/0RP0RSP0/CPU0:router:hostname(config-ipsla)# reaction operation 1

RP/0/0RP0RSP0/CPU0:router:hostname(config-ipsla-react)#

Cisco IOS XR System Monitoring Command Reference for the Cisco CRS Router, Release 4.2.x

215 OL-26517-02

IP Service Level Agreement Commands reaction operation

Related Commands

Command

operation, on page 189

schedule operation, on page 236

Description

Configures an IP SLA operation.

Schedules an IP SLA operation.

216

Cisco IOS XR System Monitoring Command Reference for the Cisco CRS Router, Release 4.2.x

OL-26517-02