Cisco IOS XR System Monitoring Command Reference for the Cisco

IP Service Level Agreement Commands type icmp echo

type icmp echo

To use the ICMP echo operation type, use the type icmp echo command in IP SLA operation configuration mode. To remove the operation, use the no form of this command.

type icmp echo no type icmp echo

Syntax Description This command has no keywords or arguments.

Command Default No default behavior or values

Command Modes IP SLA operation configuration

Command History

Release

Release 3.3.0

Release 3.3.0

Release 3.7.2

Release 5.0.0

Modification

This command was introduced.

This command was introduced.

This command was introduced.

This command was introduced.

Usage Guidelines No specific guidelines impact the use of this command.

Task ID

Task ID monitor

Operations read, write

Examples The following example shows how to use the type icmp echo command:

RP/0/0RP0RSP0/CPU0:router:hostname# configure

RP/0/0RP0RSP0/CPU0:router:hostname(config)# ipsla

RP/0/0RP0RSP0/CPU0:router:hostname(config-ipsla)# operation 1

RP/0/0RP0RSP0/CPU0:router:hostname(config-ipsla-op)# type icmp echo

RP/0/0RP0RSP0/CPU0:router:hostname(config-ipsla-icmp-echo)#

Cisco IOS XR System Monitoring Command Reference for the Cisco CRS Router, Release 4.2.x

313 OL-26517-02

IP Service Level Agreement Commands type icmp echo

Related Commands

Command

operation, on page 189

schedule operation, on page 236

Description

Configures an IP SLA operation.

Schedules an IP SLA operation.

314

Cisco IOS XR System Monitoring Command Reference for the Cisco CRS Router, Release 4.2.x

OL-26517-02