Adjustable Shoulder Strap. Zebra ZQ620, ZQ610/620

Adjustable Shoulder Strap

Refer to Figure 33 if your printer is equipped with the shoulder strap option (p/n P1031365-192).

Figure 33 • Using the Optional Shoulder Strap

1. Insert the end of the shoulder strap behind the post on the front side of the printer and loop it around the post.

2. Insert the hole on the end of the strap over the metal post (circled) to secure.

3. Repeat the same steps on the opposite side of the printer.

ZQ610 & ZQ620 User Guide